Enable/Disable The Stream; Identify The Stream; Resolution Setting; Resolution Mode Setting - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.9.8. Enable/Disable the Stream
Command and Response #streamenable
SET•/MEDIA/STREAMS/VIDEO/<in>/STREAM.Enabled=<logical_value>
ç
pw•/MEDIA/STREAMS/VIDEO/<in>/STREAM.Enabled=<logical_value>
æ
Parameters
Parameter Parameter description
The stream is unmuted or
<logical_value>
muted.
Example
ç SET /MEDIA/STREAMS/VIDEO/S101/STREAM.Enabled=true
æ pw /MEDIA/STREAMS/VIDEO/S101/STREAM.Enabled=true
9.9.9. Identify the Stream
Calling the method makes generating 10 test colors on the display device for 10 seconds. The feature helps
to identify the stream and the screen itself physically.
Command and Response #identifystream
ç CALL•/MEDIA/STREAMS/VIDEO/<in>/STREAM:identify()
æ mO•/MEDIA/STREAMS/VIDEO/<in>/STREAM:identify
Example
ç CALL /MEDIA/STREAMS/VIDEO/S101/STREAM:identify()
æ mO /MEDIA/STREAMS/VIDEO/S101/STREAM:identify
Explanation
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Value Value description
true The stream is enabled (unmuted).
false The stream is disabled (muted).
9.9.10. Resolution Setting
The resolution which is set here will be enforced only if the ResolutionMode is set to Forced. See the details
about the Resolution Mode Setting in the next section.
Command and Response
SET•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ResolutionSetting=<resolution>
ç
pw•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ResolutionSetting=<resolution>
æ
Example
ç SET /MEDIA/STREAMS/VIDEO/S601/STREAM.ResolutionSetting=1600x1200p60
æ pw /MEDIA/STREAMS/VIDEO/S601/STREAM.ResolutionSetting=1600x1200p60
INFO:
The entire list of available resolutions can be find in the
9.9.11. Resolution Mode Setting
Command and Response
SET•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ResolutionMode=<resolution_mode>
ç
pw•/MEDIA/STREAMS/VIDEO/<in>/STREAM.ResolutionMode=<resolution_mode>
æ
Parameters
Parameter Parameter description
Resolution mode
<resolution_mode>
setting
Example
ç SET /MEDIA/STREAMS/VIDEO/S302/STREAM.ResolutionMode=Forced
æ pw /MEDIA/STREAMS/VIDEO/S302/STREAM.ResolutionMode=Forced
#scaler #frc #csc #colorspace
Resolutions of the Scaler / FRC section.
Value Value description
Pass-through mode - the original stream is
Pass
transmitted.
The device forces the resolution set in
Forced the ResolutionSetting for the stream and
transmits it to the destination side.
145 145