Ubex-Pro20-Hdmi-F110 - Lightware UBEX-MMU-X200 User Manual

 
     
14. Appendix 14. Appendix
14.2.2. UBEX-PRO20-HDMI-F110
Parameter
Device label
Operation mode
Display backlight
Jog dial rotary direction
(TX - HDMI in 1 and 2 / TRX - HDMI in 2)
HDCP authentication
Stream enable
Emulated EDID on the inputs
(RX - HDMI out 1 and 2 / TRX - HDMI out 1)
HDCP mode
Power 5V mode
Timing mode
No sync screen mode
No sync screen color
Local video output port settings
(TX - HDMI out 1 and 2 / TRX - HDMI out 2)
HDCP mode
Power 5V mode
No sync screen mode
No sync screen color
RX - HDMI out 1
RX - HDMI out 2
TRX - HDMI out 2
(TX - HDMI in 1 / RX - HDMI out 1 / TRX - HDMI out 1)
Scaler enable
Scale to
Image position
Color space conversion (CSC)
Color range
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
Setting/Value
General settings

UBEX-PRO20-HDMI-F110

Keeps the current operation mode
10
Clockwise (CW down)
Video input port settings
Enabled
Enabled
Dynamic
Video output port settings
Depends on input (Auto)
Always on
Free run
Always off
R: 128, G: 128, B: 128 (grey)
Auto
Always on
Always off
R: 128, G: 128, B: 128 (grey)
Source MUX settings
Stream (D1)
Stream (D2)
HDMI in 2 (I2)
Scaler settings
Disabled (Pass-through mode)
1920x1080p60
Fit
No conversion
No conversion
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
FRC enable
Resolution to force
Color space conversion (CSC)
Color range
Volume
Balance
Gain
Volume
Balance
Static IP address - TX mode
Static IP address - RX mode
Static IP address - TRX mode
DHCP (dynamic IP address)
Subnet mask
Static gateway
LW3 port number
HTTP port number
Operation mode
TCP port
Configuration
Application mode
Dark mode
Control lock
Unique port names
Unique device label
User EDIDs
Parameter
Frame rate converter settings
(TX - HDMI in 2 / RX - HDMI out 2 / TRX - HDMI in 2)
Disabled (Pass-through mode)
1920x1080p60
No conversion
No conversion
Analog audio input port properties
0.00 dB (100%)
0 (center)
0.00 dB
Analog audio output port properties
0.00 dB (100%)
0 (center)
Network settings
192.168.0.101
192.168.0.102
192.168.0.101
Disabled
255.255.255.0
192.168.0.1
6107
80
RS-232 port settings
Command injection
8001
57600 BAUD 8N1
Miscellaneous
Auto
Disabled
Disabled
Cleared
Cleared
Not cleared
232 232
Setting/Value