Port Properties Windows; Analog Video Inputs - Lightware UMX-TPS-TX120 User Manual


  
5. Software Control - Lightware Device Controller
5.5. Port Properties Windows
Clicking on the port tile opens the Port properties window. This section shows the available settings and
status information by port types.
5.5.1. Analog Video Inputs
Port properties windows of VGA and DVI-A input ports provide similar settings and status information:
Port properties window of the VGA video input
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
Available settings: #mute #unmute #lock #unlock #testpattern
▪ Mute/unmute the port;
Lock/unlock the port;
▪
Source: Auto / RGB / YUV;
▪
▪ Analog options, see the details below;
▪ No sync screen: configuration settings of the
Frame Detector;
▪
▪ Reloading factory default settings for the selected port.
Analog Options
Analog video signals are digitized on the input. The timing parameters can be adjusted here if needed.
Timing presets can be saved for each resolution separately. User has 8 user presets to store different timing
data.
#nosyncscreen
Test Pattern;
#framedetector
#factorydefault
Analog options and Presets windows in LDC
55