Features - Lightware UBEX-MMU-X200 User Manual

 
     
1. Introduction 1. Introduction
1.5. Features
For the UBEX-MMU-X200
Dynamic Virtual Matrix
0 1 0 0 0 0 0 0 0 0
0 0 1 0 1 1 0 1 0 1 1 0
0 1 1 0 1 0 0 1 0 0 1 1 0
1 0 0 0 0 1 0 0 0 1 0 0 0 0 0 1
0 1 0 0 1 0 0 0 0 0 1 0 0 0 0
0 1 0 1 0 1 0 1 1 0 1 0 1 1 1 0
0 1 0 1 0 1 0 1 1 1 1 0 0 1 1 1 0
1 1 0 1 0 1 1 1 0 1 1 1 1 0 1 1 1
0 1 0 0 1 1 0 0 1 0 0 1 0 0 0 1
1 1 0 0 1 1 0 1 1 0 1 0 1 1 1 0
0 1 1 1 0 1 1 0 0 1 0 1 1 0 1 1 0
1 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 1 The Matrix Management Unit (MMU) can build up a dynamic virtual matrix with any number
1 0 1 1 1 0 1 1 0 1 1 1 0 1 1 0
0 1 1 1 0 0 1 0 0 1 0 1 0 1 0 1
1 0 0 0 1 0 0 1 1 0 1 0 0 1 0 0 1
0 1 1 1 1 0 1 1 1 0 1 0 1 1 1 1 0
1 1 1 1 0 1 1 1 1 1 1 0 1 1 1 1
1 0 1 0 1 1 1 1 1 1 1 1 1 0 1 1
1 1 1 1 1 1 1 0 0 1 0 1 1 0 1 1 1
1 0 1 0 0 1 0 0 1 1 0 1 0 1 0 0 1
0 1 0 0 1 0 0 0 0 0 0 1 1 0 0 0
0 1 0 0 0 1 0 1 1 0 1 0 1 1 1 0 of transmitters, receivers and transceivers connected in one network. It displays a traditional
0 1 0 1 0 1 0 0 0 1 0 0 0 0 1 1 0
1 0 0 0 1 1 0 0 0 1 0 1 0 0 0 1
1 0 1 1 1 0 1 1 0 1 0 1 1 0 1 1 0
0 1 1 1 0 0 1 0 0 1 0 1 0 1 0 1
1 0 0 0 1 0 0 1 1 0 1 0 0 1 0 0 1
0 1 1 1 0 0 1 1 1 0 1 0 1 1 1 0
0 0 0 0 1 0 0 1 0 1 0 0 1 0 0 1
1 0 0 1 0 0 0 0 0
0 1 0 1 1 1 0
0 0 0
0 crosspoint view of the virtual matrix in the Lightware Device Controller (LDC) software, also
displaying the video streams which can be sorted by unique tags for the easy recognition.
Video Wall Application
The UBEX devices can be arranged to a Video wall up to 8x4 (column x row) display devices.
The displayed video can be the same on each display, one image enlarged to all the sinks, or the
mixture of these. More different layout can be defined for the same video wall.
Signal Bandwidth Management
The Matrix Management Unit can prioritize the video streams by the signal bandwidth. The
priority order is specified by the user based on the current application.
Global Diagnostic Statistics
The Matrix Management Unit collects data about the actual health and link status of all
connected endpoint devices. User can always check the current state of the UBEX matrix in the
Lightware Device Controller software or in the built-in web page of the MMU.
Centralized Firmware Upgrade
The easiest way to keep your UBEX matrix up to date. The firmware package of all endpoint
models are built in the MMU and the upgrade procedure is executed automatically for the
endpoints which are in the matrix.
Built-in Web Page
w w w
Easy access from a web browser to control and configure the Matrix Management Unit and the
UBEX matrix.
For All UBEX Endpoint Models
Uncompressed 4K Support
Up to HDMI 2.0 4K 2160p@60Hz 4:4:4 video input or 4096x2160@60Hz resolution over a
20 Gigabit network with extra low latency.
Ethernet Based Extender
The UBEX system is Ethernet based, using 10 GbE, IGMPv2, and IPv4 protocols.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
2.2
#new
YCbCr
RGB
Pixel Accurate Reclocking
Each output has a clean, jitter free signal, eliminating signal instability and distortion caused by
long cables or connector reflections.
HDCP 2.2 compliant
The UBEX extenders complies to the HDCP 2.2 standard. HDCP capability on the digital video
inputs can be disabled when non-protected content is extended.
Frame Detector and Signal Analysis
The exact video and audio signal format can be determined such as timing, frequencies, scan
mode, HDCP encryption, color range, color space and audio sample rate.
Scaling the Output Image
Video scaling is the process of changing the size of a video frame in order to match the native
resolution of a display sink. It involves converting the resolution to a higher or lower format and
also a change in aspect ratio; typically from 4:3 to 16:9.
Changeable Operation Mode
UBEX endpoint devices can be configured as transmitter, receiver, or transceiver in few simple
step by the user anytime.
Frame Rate Converter
Frame rate conversion is available for the UBEX endpoints in transmitter, receiver, and
transceiver operation modes either. The most frequently used refresh rates can be forced on
both inputs or outputs.
Seamless Switching (Clean Cut)
UBEX series extenders provide seamless switching (clean cut) technology which is the
capability to deliver consistent performance and reliability. The advantage of the technology is
that various environments with different video sources and displays will not impact signal loss.
Multi Stream
UBEX endpoint devices are able to simultaneously transmit two video streams with embedded
audio via the SFP+ interface.
Stream Copy
UBEX endpoint devices are able to copy the stream of the HDMI out 1 to the HDMI out 2 port.
This is the COPY function. The function is available in receiver and transceiver operation modes.
#new
Color Space Conversion
Color space of the output video can be changed based on the type of the display device.
14 14