Programmer's Reference - Lightware UBEX-MMU-X200 User Manual

 
     

9. Programmer's Reference

9. Programmer's Reference
9
P rogrammer' s Reference
The device can be controlled through Lightware 3 (LW3) protocol commands to ensure the compatibility with other
Lightware products. The supported LW3 commands are described in this chapter.
ç Overview
ç Instructions for the Terminal Application Usage
ç Protocol Rules
ç The Tree Structure of the UBEX Matrix
ç System Commands - MMU
ç System Commands - Endpoints
ç Endpoint Management Commands
ç Video Crosspoint Settings
ç Video Stream Settings - Source (Input) Side
ç Video Stream Settings - Destination (Output) Side
ç Video Wall Configuration
ç Audio Crosspoint Settings
ç Audio Stream Settings
ç Analog Audio Port Settings
ç EDID Management
ç System Monitoring Commands
ç SFP+ Module Information
ç Network Configuration - MMU
ç Ethernet Port Configuration - Endpoint
ç Serial Port Configuration - MMU
ç Serial Port Configuration - Endpoint Devices
ç Infrared Port Configuration - Endpoint Devices
ç Message Sending via Communication Ports
ç Centralized Firmware Upgrade
ç LW3 Protocol Commands - Quick Summary
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual 130 130