Mounting Options - R-Series Endpoint Devices; Truss Mounting; Standard Rack Installation - Lightware UBEX-MMU-X200 User Manual

 
     
5. Installation 5. Installation
5.2. Mounting Options - R-series Endpoint Devices
UBEX R-series endpoint devices can be mounted in several ways, depending on the application. They can
be mounted into the rack in pairs, or can be used standalone. Rack ears also serve easy handling and bump
protection, mounting threads on top and one of the sides to conform strict installation safety regulations.

ATTENTION! To ensure the correct ventilation and avoid overheating let enough free space in front and
rear of the appliance and keep the ventilation holes free.
5.2.1. Truss Mounting
Mounting thread on top and on one of the sides for safe and secure installation. Rigging the handles with a
safety wire rope is highly recommended for safety reasons.
To order mounting accessories please contact sales@lightware.com. (Truss clamp and safety wire rope are
not available at sales.)
Truss mounting for R-series endpoint devices
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
5.2.2. Standard Rack Installation
Rack mounting kit includes all necessary accessories for standard rack installation:
▪ 2 pcs rack ears,
▪ 12 pcs. black, M4x8mm hexagon socket countersunk head screws.
Rack mounting kit is not supplied with the product, it can be purchased separately, please contact
lightware.com.
Step 1. Take two devices directly each other.
Step 2. Two mounting holes on the front ears and two on the back of the chassis is for fastening the two
units to each other with 2x 2 pcs M4x8 mm screws. This way you get a one-rack wide and 1U high
device.
Front View
Rear View
35 35
sales@