Managing Of The Layout And Zones - Lightware UBEX-MMU-X200 User Manual

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
Step 3. Add a unique name for the layout in the Layout name field, the
default name is LAYOUT1. The next step is defining the zones
where the contents will be displayed.
Step 4. Click on the  Add Zone button. Click on the upper
left corner of the zone at first, then click on the
lower right. A unique name can be added in the Zone
name field, the default for the first one is ZONE1.
Define all zones on the video wall. In our example
three zones are created by the following way:
ZONE1: R1 C1, R1 C2, R2 C1, R2 C2;
ZONE2: R1 C3, R2 C3;
ZONE3: R3 C1, R3 C2, R3 C3.
Legend: R1 C3 = Display in the Row 1 and Column 3.
The picture below shows all the defined zones:
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Step 5. Click on the Save layout button to complete the new layout.
Step 6. Complete the video wall. Click on the  (Activate) icon next to of the
name of the video wall. When the icon changes to  and the name
changes to white, the video wall with the new layout becomes active.
Step 7. Click on the  (Activate) icon next to of the name of the layout. The
green icon means the currently active layout.
8.19.4. Managing of the Layout and Zones
The new layout can be deleted by clicking on the  (Delete) icon next to the name of the
layout in the Available video walls section.
All zones can be deleted by clicking on the  Clear All Zones button.
Each zone can be deleted by clicking on the  (Delete) icon in the zone
section. in the Available video walls section.
The zone can be identified by clicking on the  (Identify zone) icon. See
the details about in the
The new layout is created
Identify Stream / Identify Display section.
127 127