Setting The Balance; Setting The Gain; Mute/Unmute The Analog Audio Output Port - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.14.3. Setting the Balance
Command and Response
SET•/MEDIA/STREAMS/AUDIO/<in|out>/PORT.Balance=<balance>
ç
pw•/MEDIA/STREAMS/AUDIO/<in|out>/PORT.Balance=<balance>
æ
Parameters
Parameter
Sets the balance; -100 means left balance, +100 means right balance, step is 1.
<balance>
Center is 0 (default).
Example
ç SET /MEDIA/STREAMS/AUDIO/D103/PORT.Balance=+25
æ pw /MEDIA/STREAMS/AUDIO/D103/PORT.Balance=+25
9.14.4. Setting the Gain

INFO: The setting is available on the analog audio input port only.
Command and Response
SET•/MEDIA/STREAMS/AUDIO/<in>/PORT.Gain=<gain>
ç
pw•/MEDIA/STREAMS/AUDIO/<in>/PORT.Gain=<gain>
æ
Parameters
Parameter
<gain> Sets the input gain between -12 dB and 35 dB.
Example
ç SET /MEDIA/STREAMS/AUDIO/S103/PORT.Gain=4
æ pw /MEDIA/STREAMS/AUDIO/S103/PORT.Gain=4
#balance #gain
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Parameter description
Parameter description
9.14.5. Mute/Unmute the Analog Audio Output Port

INFO: The setting is available on the analog audio output port only.
Command and Response #mute #unmute
SET•/MEDIA/STREAMS/AUDIO/<out>/PORT.Mute=<logical_value>
ç
pw•/MEDIA/STREAMS/AUDIO/<out>/PORT.Mute=<logical_value>
æ
Parameters
Parameter Parameter description
The port is muted or
<logical_value>
unmuted.
Example
ç SET /MEDIA/STREAMS/AUDIO/D103/PORT.Mute=true
æ pw /MEDIA/STREAMS/AUDIO/D103/PORT.Mute=true
167 167
Value Value description
true The port is muted.
false The port is unmuted.