Ports Menu - Transceiver Operation Mode; Trx I2 Port; Trx O1 Port; Trx O2 Port - Lightware UBEX-MMU-X200 User Manual

 
     
4. Front Panel LCD Menu Operation - Endpoints 4. Front Panel LCD Menu Operation - Endpoints
4.6. Ports Menu - Transceiver Operation Mode
The most important settings and status information of the HDMI input 1 and the
HDMI output ports are available in the Ports menu.
Select the desired output port and enter to see the submenus.
4.6.1. TRX I2 Port
HDMI Input
The HDCP setting and information about the HDMI input 2 port are displayed:
▪ +5V present
▪ Signal present
▪ Active resolution
▪ Total resolution
▪ Color space
Stream Output
The following settings and information is related to the video stream which is sent toward the remote TRX
endpoint:
▪ Signal present
▪ Active resolution
▪ Total resolution
Color space
▪
4.6.2. TRX O1 Port
Stream Input
The following settings and information are related to the video stream coming from the input port of the
remote TRX endpoint:
▪ Signal present
▪ Active resolution
▪ Total resolution
▪ Color space
HDMI Output
The following information are displayed for the HDMI output 2 port of the transceiver:
▪ Hotplug detect
▪ Signal present
▪ Active resolution
▪ Total resolution
▪ Color space
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
4.6.3. TRX O2 Port
The following information is displayed for the local output port:
▪ Hotplug detect
▪ Signal present
▪ Active resolution
▪ Total resolution
▪ Color space
Source Mux
The source multiplexer (Source MUX) makes available routing more different source signals to the HDMI out 2
port. See more details about this function in the
▪ Loopback (I2)- The signal source of the output port is the stream of the HDMI in 2 port of the transceiver.
▪ Copy (O1) - The device is able to copy the signal of the HDMI out 1 port. This is the COPY function.
4.7. EDID Menu
Reduced Advanced EDID Management is available in the front panel LCD menu
which allows to view an EDID. See more information about EDID technology in
EDID Management
found in Advanced EDID Management
4.7.1. View
Select the desired EDID memory block: Factory EDIDs, Last Attached EDIDs, User
EDIDs, or Emulated EDIDs (only in case of the transmitter). Select the Name item
and press the knob. Use the jog dial to step between the EDIDs. The following
information can be checked:
▪ Preferred Resolution
▪ Monitor Name
▪ Audio Info
Transceiver Mode section.
section. The EDID memory structure of the device can be
section.
31 31
#mux #sourcemux #new