Sfp+ Module Information; Query The Vendor; Query The Part Number; Query The Compliance - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.17. SFP+ Module Information
The section is about the installed SFP+ module / DAC cable of the endpoint devices.
9.17.1. Query the Vendor
Querying of the vendor of the installed SFP+ module.
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.VendorName
pr•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.VendorName=<vendor_name>
æ
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.VendorName
æ pr /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.VendorName=FINISAR CORP.
9.17.2. Query the Part Number
Querying of the part number of the installed SFP+ module.
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.PartNumber
pr•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.PartNumber=<partnumber>
æ
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.PartNumber
æ pr /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.PartNumber=FTLX1471D3BCL
9.17.3. Query the Compliance
Querying of the standard compliance of the installed SFP+ module.
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.Compliance
pr•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.Compliance=<compliance>
æ
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.Compliance
æ pr /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.Compliance=10G BASE-LR
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
9.17.4. Query the Maximum Allowed Cable Length
Querying of the maximum allowed cable length of the installed SFP+ module. The parameter is in meter.
#sfp
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.MaxLinkLength
pr•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.MaxLinkLength=<length>
æ
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.MaxLinkLength
æ pr /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.MaxLinkLength=10000
9.17.5. Query the Type of the Module
Querying of the type (singlemode, multimode, passive DAC, etc.) of the installed SFP+ module.
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.Type
pr•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.Type=<type>
æ
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.Type
æ pr /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.Type=Singlemode
9.17.6. Query the Compatibility of the Module
The query returns with the compatibility of the installed transceiver module. If it is false, the installed
module maybe SFP module (with 1 GbE signal transmission) instead of SFP+ module (with 10 GbE signal
transmission).
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.Compatible
pr•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.Compatible=<logical_value>
æ
Parameters
<logical_value>
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.Compatible
æ pr /SYS/ENDPOINTS/UBEX0039A1/STATUS/UPLINK/LINK1/SFP.Compatible=true
Parameter Parameter description Value
true
Compatiblity of the
module
false
173 173
Value description
The installed SFP+ module is compatible with
the endpoint device.
The installed module is not compatible.
Possible root cause can be the module is SFP
instead of SFP+.