8. Software Control - Lightware Device Controller
8. Software Control - Lightware Device Controller
Stream Properties Panels
Clicking on the Stream 1 or Stream 2 panels open the properties of the video input streams. The most
important signal information and settings are available from the panel.
Endpoint tab of the Device properties window - Transmitter - Stream properties
Settings
▪
Stream naming;
▪
Enabled: when it is checked in, the stream is enabled; if it is not, the stream is muted.
▪
Tile icon: choose an icon which is the most suitable with the source/destination device connected to
the endpoint.
▪
Identify Stream / Identify
Display.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
#identifystream #identifydisplay
series – Matrix Application Mode – User's Manual
series – Matrix Application Mode – User's Manual
Scaler Settings (only for the Stream of the HDMI in 1)
▪
Scaling mode:
– Passthrough: the scaler is in pass-through mode.
– Forced resolution: the scaling is active, the selected value in the forced resolution option will be
applied on the video signal;
▪
Forced resolution: list of the available resolutions with refresh rate values. The selected one will be
applied on the video signal. See the available resolution in the
▪
Image position (Stretch / Fit / Center)
▪
Color space conversion (No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2).
▪
Color range (No conversion / Full range / Limited range);
▪
No Sync Screen (Test
Frame Rate Converter Settins (only for the Stream of the HDMI in 2)
▪
Output resolution mode:
– Passthrough: the FRC is in pass-through mode.
– Forced resolution: the FRC is active, the selected value in the forced resolution option will be
applied on the video signal;
▪
Forced resolution: list of the available resolutions with refresh rate values. The selected one will be
applied on the display device. See the available resolution in the
section.
▪
Color space conversion (No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2);
▪
Color range (No conversion / Full range / Limited range);
▪
No Sync Screen (Test
Tags
Unique and configurable tags can be attached to the stream for the best identification. The tags are
searchable in the
#scaler #frc #csc #colorspace #colorrange #testpattern #nosyncscreen #tag
#streamenable
#new
Pattern).
#new
Pattern).
Search
Field.
98
98
Resolutions of the Scaler / FRC
section.
Resolutions of the Scaler / FRC