Lightware UBEX-MMU-X200 User Manual page 108

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
Tools
▪ Frame Detector - The tool displays the frame information of the transmitted stream after a possible
rescaling / frame rate conversion.
Destination Stream Panel
Clicking on the destination stream panel opens the properties of the stream. The most important signal
information and settings are available from the panel.
Endpoint tab of the Device properties window - Transceiver - Destination stream properties
Settings
▪
Stream naming;
▪ Enabled: when it is checked in, the stream is transmitted to the receiver; if it is not, the stream is muted.
▪ Stream source: information about the currently connected stream and the ID of the source device.
Disconnect stream: clicking on the button results the source stream is disconnected from the output
▪
port.
▪ Tile icon: choose an icon which is the most suitable with the source/destination device connected to
the endpoint.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Tags
Unique and configurable tags can be attached to the stream for the best identification. The tags are
searchable in the
Signal Info
All important information (resolution, pixel clock, color space, e.g.) are available in the signal info section.
The signal bandwidth and the bandwidth limit reached indicators can also be checked in this panel.
Related Audio Info
Information (presence, audio type, sampling frequency) of the embedded audio is available in the related
audio info section.
Tools
Frame Detector
▪
rescaling / frame rate conversion.
HDMI In 2 Panel
Clicking on the HDMI in 2 panel opens the properties of the input port. The most important signal information
and settings are available from the panel.
Endpoint tab of the Device properties window - Transceiver - Input port properties
Search Field. #streamenable #tag
- The tool displays the frame information of the transmitted stream after a possible
108 108