Lightware UBEX-MMU-X200 User Manual page 191

 
     
9. Programmer's Reference 9. Programmer's Reference
Deleting Tags of the Stream
ç CALL•/MEDIA/STREAMS/AUDIO/<in|out>:removeTags(<tag>)
Deleting All Tags of the Stream
ç CALL•/MEDIA/STREAMS/AUDIO/<in|out>:removeAllTags()
Query All Tags of the Device
ç GET•/MEDIA/STREAMS/AUDIO/<in|out>.DeviceTags
Analog Audio Port Settings
Setting the Volume in dB
SET•/MEDIA/STREAMS/AUDIO/<in|out>/Port.VolumedB=<volume>
ç
Setting the Volume in Percent
SET•/MEDIA/STREAMS/AUDIO/<in|out>/PORT.VolumePercent=<percent>
ç
Setting the Balance
SET•/MEDIA/STREAMS/AUDIO/<in|out>/PORT.Balance=<balance>
ç
Setting the Gain
SET•/MEDIA/STREAMS/AUDIO/<in>/PORT.Gain=<gain>
ç
Mute/Unmute the Analog Audio Output Port
SET•/MEDIA/STREAMS/AUDIO/<out>/PORT.Mute=<logical_value>
ç
EDID Management
Query the Validity of a Dynamic EDID
ç GET•/MEDIA/EDID/D/<dynamic>.Validity
Query the Preferred Resolution of an EDID
ç GET•/MEDIA/EDID/U|F|D|E/<user|factory|dynamic|emulated>.PreferredResolution
Emulating an EDID on an Input Port
ç CALL•/MEDIA/EDID:switch(<user|factory|dynamic>:<emulated>)
Emulating an EDID on All Input Ports
ç CALL•/MEDIA/EDID:switchAll(<user|factory|dynamic>)
Copy an EDID to User Memory
ç CALL•/MEDIA/EDID:copy(<user|factory|dynamic|emulated>:<user>)
Deleting an EDID from User Memory
ç CALL•/MEDIA/EDID:delete(<user>)
Resetting the Emulated EDIDs
ç CALL•/MEDIA/EDID:reset()
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
System Monitoring Commands
Query Connected Device Presence
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/PORT.Connected
Query Video Signal Presence on a Port
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/PORT.SignalPresent
Query Video Signal Presence in a Stream
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.SignalPresent
Query Embedded Audio Presence
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.EmbeddedAudioPresent
Query the Signal Type
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.SignalType
Query the Original Resolution of the Stream Source
ç GET•/MEDIA/STREAMS/VIDEO/<in>/PORT.Resolution
Query the Modified Resolution of the Stream Source
ç GET•/MEDIA/STREAMS/VIDEO/<in>/STREAM.Resolution
Query the Original Resolution of the Stream Destination
ç GET•/MEDIA/STREAMS/VIDEO/<out>/STREAM.Resolution
Query the Modified Resolution of the Stream Destination
ç GET•/MEDIA/STREAMS/VIDEO/<out>/PORT.Resolution
Query the Bandwidth of the Stream
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.Bandwidth
Query the Control Module of the Stream Destination
ç GET•/MEDIA/XP/VIDEO/<out>/.OwnedBy
Query the Bandwidth Limitation Indicator
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.BandwidthLimitExceeded
Query the Status of the Analog Audio Output
ç GET•/MEDIA/STREAMS/AUDIO/<out>/Port.MuteStatus
Query the Health Status of a Selected Endpoint
ç GETALL•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/HEALTH
Query the Link Status of a Selected Endpoint
GETALL•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>
ç
191 191