Video Interface; Transmitter Mode - Lightware UBEX-MMU-X200 User Manual

 
     
6. UBEX Concept 6. UBEX Concept
6.3. Video Interface
6.3.1. Transmitter Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-F110
▪ UBEX-PRO20-HDMI-R100 series
Video port diagram of the F100/F110/R100 transmitter
HDMI Input Modes
The transmitter can receive HDMI video streams from two HDMI 2.0 input ports. The signals can be up to
4K@60 Hz 4:4:4 in the case of both inputs.
The video streams of the HDMI inputs can be processed in the video processors. The processor of the HDMI
in 1 has video scaler, frame rate converter (FRC), and color space converter (CSC) functions. The processor of the
HDMI in 2 has frame rate converter and color space converter functions.
The scaler, frame rate converter, and color space converter settings are available in the LDC software (see
the details in the Video Source Port Properties Window
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
or in the Stream Properties Panels section).
HDMI Output Modes
The HDMI output ports of the transmitter are HDMI loop-back ports and can be used as local HDMI outputs.
The HDMI output 1 transmits the signal of the HDMI input 1 port, the HDMI output 2 transmits the signal of
the HDMI input 2 port.
Fiber Optical Interface
After the Ethernet packetizing the two video streams are transmitted to the remote endpoint device via the
fiber optical ports.
Summary Tables
Accepted signal up to 4K@60 4:4:4
Scaler
Frame rate converter (FRC)
Color space converter (CSC)
HDMI OUTPUTS
Output signal
Signal source
HDMI INPUTS
HDMI input 1 HDMI input 2
up to 4K@60 4:4:4
 
-
   
   
HDMI output 1 HDMI output 2
up to up to
4K@60 4:4:4 4K@60 4:4:4
HDMI in 1 HDMI in 2
61 61