System Commands - Endpoints; Set The Device Label; Query The Product Name; Query The Operation Mode - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.6. System Commands - Endpoints
Parameters
Parameter Description
<UBEX_EP> UBEX endpoint ID
9.6.1. Set the Device Label

INFO: The device label can be changed to a custom text in the LDC software. See the details about the
device renaming in the Device Information
for the Destination side.
The Device Label can be 64 characters long and ASCII characters are allowed. Longer names will be
truncated.
Command and Response #label #devicelabel
SET•/SYS/ENDPOINTS/<UBEX_EP>.DeviceLabel=<custom_name>
ç
pw•/SYS/ENDPOINTS/<UBEX_EP>.DeviceLabel=<custom_name>
æ
Example
ç SET /SYS/ENDPOINTS/UBEX0039A1.DeviceLabel=UBEX_RX_Theater
æ pw /SYS/ENDPOINTS/UBEX0039A1.DeviceLabel=UBEX_RX_Theater
9.6.2. Query the Product Name
ATTENTION!
The name of the product is a read-only parameter and cannot be modified.
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.ProductName
pr•/SYS/ENDPOINTS/<UBEX_EP>.ProductName=<Product_name>
æ
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1.ProductName
æ pr /SYS/ENDPOINTS/UBEX0039A1.ProductName=UBEX-PRO20-HDMI-F110
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Formula
UBEX<last_6_characters_of_the_MAC_address>
section for the source side and the Device Information
9.6.3. Query the Operation Mode
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.OperationMode
pw•/SYS/ENDPOINTS/<UBEX_EP>.OperationMode=<operation_mode>
æ
Parameters
Parameter
section
<operation_mode>
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1.OperationMode
æ pw /SYS/ENDPOINTS/UBEX0039A1.OperationMode=Transceiver
#operationmode #transmitter #receiver #transceiver #tx #rx #trx
Parameter description Value
The endpoint device operates as
Transmitter a Transmitter. See the details in the
Transmitter Mode
The endpoint device operates as
The operation mode of
Receiver a Receiver. See the details in the
the endpoint device
Receiver Mode
The endpoint device operates as
Transceiver a Transceiver. See the details in the
Transceiver Mode
137 137
Value description
section.
section.
section.