Resolution Setting; No Sync Screen Setting; Query The Display Parameters; Change The Width Of The Display - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.11.15. Resolution Setting
The resolution which is set here will be enforced only if the ResolutionMode is set to Forced.
Command and Response
SET•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.ResolutionSetting=<resolution>
ç
pw•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.ResolutionSetting=<resolution>
æ
Example
ç SET /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.ResolutionSetting=1920x1080p60
æ pw /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.ResolutionSetting=1920x1080p60

INFO: The entire list of available resolutions can be find in the
9.11.16. No Sync Screen Setting
Enables or disables the BackgroundColor with the set color of the video wall or the active zone when the wall
is in edit state. See the setting of the color in the
Command and Response #testpattern #nosyncscreen
SET•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.ForceNoSyncScreen=<logical_value>
ç
pw•/MEDIA/VIDEOWALLS/<video_wall_ID>/SETTINGS.ForceNoSyncScreen=<logical_value>
æ
Parameters
Parameter Parameter description
Enables or
BackgroundColor with the set
<logical_value> color of the video wall or the
active zone when the wall is in
edit state.
Example
ç SET /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.ForceNoSyncScreen=true
æ pw /MEDIA/VIDEOWALLS/VIDEOWALL1/SETTINGS.ForceNoSyncScreen=true
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
Resolutions of the Scaler / FRC
Setting the Background Color of the Video Wall
Value Value description
No sync screen is enabled, the displays
disables the
true shows the color which are set in the
BackgroundColor property.
No sync screen is disabled, the displays
false
shows the active video stream.
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
9.11.17. Query the Display Parameters
The query returns with the set parameters of all display devices in the video wall. These parameters are set
originally when the video wall is created - see the details in the
Command and Response
ç GET•/MEDIA/VIDEOWALLS/<video_wall_ID>/DISPLAYS.All
pr•/MEDIA/VIDEOWALLS/<video_wall_ID>/DISPLAYS.All=<display_parameters>
æ
Parameters
The <display_parameters>
<horizontal_size>;<vertical_size>;<top_bezel_size>;<bottom_bezel_size>;<left_bezel_size>;<right_bezel_
section.
size>;<horizontal_gap_size>;<vertical_gap_size>
Parameter
section.
<horizontal_size>
<vertical_size>
<top_bezel_size>
<bottom_bezel_size>
<left_bezel_size>
<right_bezel_size>
<horizontal_gap_size>
<vertical_gap_size>
Example
ç GET /MEDIA/VIDEOWALLS/VIDEOWALL1/DISPLAYS.All
æ pr /MEDIA/VIDEOWALLS/VIDEOWALL1/DISPLAYS.All=500;300;10;10;10;10;0;0
9.11.18. Change the Width of the Display
Command and Response
SET•/MEDIA/VIDEOWALLS/<video_wall_ID>/DISPLAYS/ALL.Width=<horizontal_size>
ç
pw•/MEDIA/VIDEOWALLS/<video_wall_ID>/DISPLAYS/ALL.Width=<horizontal_size>
æ
Example
ç SET /MEDIA/VIDEOWALLS/VIDEOWALL1/DISPLAYS/ALL.Width=657
æ pw /MEDIA/VIDEOWALLS/VIDEOWALL1/DISPLAYS/ALL.Width=657
Creating Video Wall
includes the following order of settings:
Description
The width of the screen (display area) in mm.
The height of the screen (display area) in mm.
Top bezel of the sink device in mm.
Bottom bezel of the sink device in mm.
Left bezel of the sink device in mm.
Right bezel of the sink device in mm.
Horizontal gap between the sink devices in mm.
Vertical gap between the sink devices in mm.
157 157
section.