Video Destination Port Properties Window; Stream Information; Port Information - Lightware UBEX-MMU-X200 User Manual

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
8.9. Video Destination Port Properties Window
Clicking on a destination port the properties panel opens on the right side. Clicking on the  icon the
properties section opens in new window.

Video destination port properties window

8.9.1. Stream Information
The most important information and settings of the stream are available in the Stream information section.
Settings
▪
Stream naming;
▪ Enabled: when it is checked in, the stream is transmitted to the receiver; if it is not, the stream is muted.
▪ Stream source: information about the currently connected stream and the ID of the source device.
▪ Disconnect stream: clicking on the button results the source stream is disconnected from the output
port.
▪ Tile icon: choose an icon which is the most suitable with the source/destination device connected to
the endpoint. #streamenable
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Tags
Unique and configurable tags can be attached to the stream for the best identification. The tags are
searchable in the
Signal Info
All important information (resolution, pixel clock, color space, e.g.) are available in the signal info section.
The signal bandwidth and the bandwidth limit reached indicator are also can be checked in this panel.
Related Audio Info
Information (presence, audio type, sampling frequency) of the embedded audio is available in the related
audio info section.
Tools
▪ Frame Detector
connected source stream before a possible rescaling / frame rate conversion.
8.9.2. Port Information
The most important information and settings of the input port are available in the Port information section.
Port Selector

INFO: The port selector menu is available for receiver operation mode only.
The two output ports which belong to the same endpoint device can be selected in the Port selector menu.
Because of the Source MUX settings it may happen that the selected destination stream is connected to
none of the output ports because the source stream is the local input port or the copy of the HDMI out 1. The
video settings and the port/signal information are still available with the port selector menu.
DEFINITION:

to the HDMI output ports. See more details about this function in the
Mode sections.
Search Field. #tag
- The tool displays the frame information of the original stream coming from the
The source multiplexer (Source MUX) makes available routing more different source signals
93 93
Receiver Mode and Transceiver