Control Menu; Ethernet Tab; Tab - Lightware UBEX-MMU-X200 User Manual

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
8.14. Control Menu
The Ethernet control ports, the RS-232 port and the Infrared ports can be configured in the Control menu.
8.14.1. Ethernet Tab
Clicking on the Ethernet port icon results opening the Port properties. The most important information and
settings are available on the panel. #ethernet #tag
Ethernet tab in the Control menu
Switchers
▪ Show Inactive UBEXes: when it is enabled, the inactive endpoints appear in the list.
▪ Show Disabled Ports: when it is enabled, the disabled ports appear in the list.
Group by UBEXes: when it is enabled, the ports belonging to one endpoint device are arranged to one
▪
group for the better overseeing.
Available settings and tools
▪ Port naming;
▪
Enable/disable the port;
Mode (Auto negotiation / 10Mbps half-duplex / 10Mbps full-duplex / 100Mbps half-duplex /
▪
100Mbps full-duplex / 1000Mbps full-duplex).
▪ Reloading factory default settings for the selected port.
Tile icon: choose an icon which is the most suitable with the device connected to the endpoint.
▪
▪ Tags: unique and configurable tags can be attached to the stream for the best identification. The tags
are searchable in the Search Field.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
8.14.2. RS-232 Tab

DIFFERENCE:
Clicking on the RS-232 port icon results opening the Port properties. The most important information and
settings are available on the panel.
Switchers
▪ Show Inactive UBEXes: when it is enabled, the inactive endpoints appear in the list.
▪ Show Disabled Ports: when it is enabled, the disabled ports appear in the list.
▪ Group by UBEXes: when it is enabled, the ports belonging to one endpoint device are arranged to one
group for the better overseeing.
Available settings and tools
▪ Port naming;
▪ Baud rate (4800 / 7200 / 9600 / 14400 / 19200 / 38400 / 57600 / 115200);
▪ Databits (read-only parameter, the value is 8);
▪ Parity (None / Odd / Even);
▪ Stop bits (1 / 1.5 / 2);
▪ Tile icon: choose an icon which is the most suitable with the device connected to the endpoint.
▪ Tags: unique and configurable tags can be attached to the stream for the best identification. The tags
are searchable in the
Enable command injection (enable / disable);
▪
▪
TCP port number;
▪ Send message field;
▪ Reloading factory default settings for the selected port.
Only the UBEX-PRO20-HDMI-F110 model has built with serial interface port.
#rs232 #rs-232 #serial #tag
RS-232 tab in the Control menu
Search Field.
117 117