Dark Mode Setting; Dark Mode Delay Setting; Setting The Rotary Direction Of The Jog Dial Knob; Setting The Brightness Of The Lcd Screen - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.6.9. Dark Mode Setting
Rental application requires this function, which
keeps the LCD screen and the LEDs unlit to hide
the device during the event.
Command and Response #darkmode #new
SET•/SYS/ENDPOINTS/<UBEX_EP>/SETTINGS/UI/DARKMODE.DarkModeEnable=<logical_value>
ç
pw•/SYS/ENDPOINTS/<UBEX_EP>/SETTINGS/UI/DARKMODE.DarkModeEnable=<logical_value>
æ
Parameters
Parameter Parameter description
Enable or disable the
<logical_value>
dark mode feature
Example
ç SET /SYS/ENDPOINTS/UBEX0039A1/SETTINGS/UI/DARKMODE.DarkModeEnable=true
æ pw /SYS/ENDPOINTS/UBEX0039A1/SETTINGS/UI/DARKMODE.DarkModeEnable=true
9.6.10. Dark Mode Delay Setting
When the dark mode feature is enabled (see the previous section), it will be launched after the delay time
expired.
Command and Response
SET•/SYS/ENDPOINTS/<UBEX_EP>/SETTINGS/UI/DARKMODE.DarkModeDelay=<second>
ç
pw•/SYS/ENDPOINTS/<UBEX_EP>/SETTINGS/UI/DARKMODE.DarkModeDelay=<second>
æ
Example
ç SET /SYS/ENDPOINTS/UBEX0039A1/SETTINGS/UI/DARKMODE.DarkModeDelay=10
æ pw /SYS/ENDPOINTS/UBEX0039A1/SETTINGS/UI/DARKMODE.DarkModeDelay=10
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Value Value description
Dark mode will be enabled after the
true
delay time expired (see next section).
false Dark mode is disabled.
9.6.11. Setting the Rotary Direction of the Jog Dial Knob
Command and Response #rotary #jogdial
SET•/SYS/ENDPOINTS/<UBEX_EP>/SETTINGS/UI.RotaryDirection=<parameter>
ç
pw•/SYS/ENDPOINTS/<UBEX_EP>/SETTINGS/UI.RotaryDirection=<parameter>
æ
Parameters
Parameter Parameter description
Rotary direction of the jog
<parameter>
dial control knob
Example
ç SET /SYS/ENDPOINTS/UBEX0039A1/SETTINGS/UI.RotaryDirection=1
æ pw /SYS/ENDPOINTS/UBEX0039A1/SETTINGS/UI.RotaryDirection=1
9.6.12. Setting the Brightness of the LCD Screen
Command and Response
SET•/SYS/ENDPOINTS/<UBEX_EP>/SETTINGS/UI.DisplayBrightness=<parameter>
ç
pw•/SYS/ENDPOINTS/<UBEX_EP>/SETTINGS/UI.DisplayBrightness=<parameter>
æ
Parameters
The <parameter> of display brightness can be set between 0 and 10 values.
Example
ç SET /SYS/ENDPOINTS/UBEX0039A1/SETTINGS/UI.DisplayBrightness=5
æ pw /SYS/ENDPOINTS/UBEX0039A1/SETTINGS/UI.DisplayBrightness=5
9.6.13. Bootload Mode Setting
The device can be set to bootload (service / firmware upgrade) mode. The AV signal transmission is
terminated in this mode.
Command and Response #bootload
ç CALL•/SYS/ENDPOINTS/<UBEX_EP>:bootload()
æ mO•/SYS/ENDPOINTS/<UBEX_EP>:bootload=
Example
ç CALL /SYS/ENDPOINTS/UBEX0039A1:bootload()
æ mO /SYS/ENDPOINTS/UBEX0039A1:bootload=
139 139
Value Value description
The rotary direction of down is
0
clockwise (CW).
The rotary direction of down is
1
counter clockwise (CCW).