Lightware UBEX-MMU-X200 User Manual page 192

 
     
9. Programmer's Reference 9. Programmer's Reference
SFP+ Module Information
Query the Vendor
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.VendorName
Query the Part Number
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.PartNumber
Query the Compliance
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.Compliance
Query the Maximum Allowed Cable Length
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.MaxLinkLength
Query the Type of the Module
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.Type
Query the Compatibility of the Module
ç GET•/SYS/ENDPOINTS/<UBEX_EP>/STATUS/UPLINK/<link>/SFP.Compatible
Network Configuration - MMU
Query the DHCP State
ç GET•/MANAGEMENT/NETWORK.DhcpEnabled
Change the DHCP State
SET•/MANAGEMENT/NETWORK.DhcpEnabled=<logical_value>
ç
Query the IP Address
ç GET•/MANAGEMENT/NETWORK.IpAddress
Change the IP Address (Static)
SET•/MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>
ç
Query the Subnet Mask
ç GET•/MANAGEMENT/NETWORK.NetworkMask
Change the Subnet Mask (Static)
SET•/MANAGEMENT/NETWORK.StaticNetworkMask=<netmask>
ç
Query the Gateway Address
ç GET•/MANAGEMENT/NETWORK.GatewayAddress
Change the Gateway Address (Static)
SET•/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_address>
ç
Apply Network Settings
ç CALL•/MANAGEMENT/NETWORK:ApplySettings()
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Ethernet Port Configuration - Endpoint
Enabling the Port
SET•/MEDIA/CONTROL/ETHERNET/<port>/PORT.Enabled=<logical_value>
ç
Ethernet Mode Setting
SET•/MEDIA/CONTROL/ETHERNET/<port>/PORT.Mode=<mode>
ç
Setting the Name of the Port
SET•/MEDIA/CONTROL/ETHERNET/<port>.Name=<name>
ç
Query the Tags of the Port
ç GET•/MEDIA/CONTROL/ETHERNET/<port>.Tags
Adding Tags to the Port
ç CALL•/MEDIA/CONTROL/ETHERNET/<port>:addTags(<tag>)
Deleting Tags of the Port
ç CALL•/MEDIA/CONTROL/ETHERNET/<port>:removeTags(<tag>)
Deleting All Tags of the Port
ç CALL•/MEDIA/CONTROL/ETHERNET/<port>:removeAllTags()
Query All Tags of the Device
ç GET•/MEDIA/CONTROL/ETHERNET/<port>.DeviceTags
Serial Port Configuration - MMU
BAUD Rate Setting
SET•/MANAGEMENT/CONTROL/SERIAL/<port>.Baudrate=<baudrate>
ç
Databits Setting
SET•/MANAGEMENT/CONTROL/SERIAL/<port>.DataBits=<databits>
ç
Stopbits Setting
SET•/MANAGEMENT/CONTROL/SERIAL/<port>.StopBits=<stopbits>
ç
Parity Setting
SET•/MANAGEMENT/CONTROL/SERIAL/<port>.Parity=<parity>
ç
Enabling the Port
SET•/MANAGEMENT/CONTROL/SERIAL/<port>.Enabled=<logical_value>
ç
192 192