Stopbits Setting; Parity Setting; Command Injection Tcp Port Setting; Remap The Command Injection Tcp Ports - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.21.2. Stopbits Setting
Command and Response
SET•/MEDIA/CONTROL/UART/<port>/PORT.StopBits=<number>
ç
pw•/MEDIA/CONTROL/UART/<port>/PORT.StopBits=<number>
æ
Parameters
Parameter Parameter description
<number> Stop bits value
Example
ç SET /MEDIA/CONTROL/UART/P101/PORT.StopBits=0
æ pw /MEDIA/CONTROL/UART/P101/PORT.StopBits=0
9.21.3. Parity Setting
Command and Response
SET•/MEDIA/CONTROL/UART/<port>/PORT.Parity=<number>
ç
pw•/MEDIA/CONTROL/UART/<port>/PORT.Parity=<number>
æ
Parameters
Parameter Parameter description
<number> Parity value
Example
ç SET /MEDIA/CONTROL/UART/P101/PORT.Parity=0
æ pw /MEDIA/CONTROL/UART/P101/PORT.Parity=0
9.21.4. Command Injection TCP Port Setting
Command and Response
SET•/MEDIA/CONTROL/UART/<port>.ServerPort=<port>
ç
pw•/MEDIA/CONTROL/UART/<port>.ServerPort=<port>
æ
Example
ç SET /MEDIA/CONTROL/UART/P101.ServerPort=8004
æ pw /MEDIA/CONTROL/UART/P101.ServerPort=8004
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Value Value description
0 1
1 1,5
2 2
Value Value description
0 None
1 Odd
2 Even
9.21.5. Remap the Command Injection TCP ports
The default TCP port number is 8001 for all RS-232 ports. Calling the method results remapping the TCP port
numbers. It requires a start number, the step is 1.
Command and Response
ç CALL•/MEDIA/CONTROL/UART:remapPorts(<start_number>)
æ mO•/MEDIA/CONTROL/UART:remapPorts()
Parameters
The <start_number> is the first non-reserved TCP port number which will be set for the first RS-232 port. This
number increases with the number of the RS-232 ports in the UBEX matrix, the step is 1.
Example
ç CALL /MEDIA/CONTROL/UART:remapPorts(9000)
æ mO /MEDIA/CONTROL/UART:remapPorts()
Explanation
In the case of three connected F110 endpoint models the TCP port of the first one will be 9000, the second
one is 9001, the third one is 9002.
9.21.6. Query the Current Configuration
Command and Response
ç GET•/MEDIA/CONTROL/UART/<port>.Rs232Configuration
pr•/MEDIA/CONTROL/UART/<port>.Rs232Configuration=<configuration>
æ
Example
ç GET /MEDIA/CONTROL/UART/P101.Rs232Configuration
æ pr /MEDIA/CONTROL/UART/P101.Rs232Configuration=57600, 8N1
Explanation
BAUD rate is 57600, databits are 8, the parity is N as none, the stopbits are 1.
178 178