Identifying Of The Display/Zone; Software Control Modes Of The Video Wall - Lightware UBEX-MMU-X200 User Manual

 
     
6. UBEX Concept 6. UBEX Concept
Layout with Six Zones
The next layout example contains six zones which displays six different source streams. It has a 3x3, a 3x1,
and four standalone zones with one display device per zone.
6.4.3. Identifying of the Display/Zone
The UBEX video wall system has a feature to help identifying a display device or a zone physically. When you
need to see quickly which display or zone you want to configure actually, this feature makes generating 10
test colors on the display device(s) for 10 seconds.
Example for Identifying a Display
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Example for Identifying a Zone
The Identify display/zone feature is available:
▪ in the Lightware Device Controller (LDC) software - see the details in the
Zones section.
▪ with LW3 protocol commands - see the details in the
6.4.4. Software Control Modes of the Video Wall
Video walls can be defined and supervised by two software control method:
▪ Lightware Device Controller (LDC) / Built-in Website - see the details in the
▪ LW3 protocol commands - see the details in the
Managing of the Layout and
Identify the Zone section.
Video Wall Setup
Crosspoint view of the LDC with video wall
Video Wall Configuration section.
70 70
section.