No Sync Screen (Test Pattern); Identify Stream / Identify Display; Edid Management Menu - Lightware UBEX-MMU-X200 User Manual

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
8.12.2. No Sync Screen (Test Pattern)
The No sync screen feature generates an image which can be
displayed when there is no incoming signal on the port. The
following settings can be set for the Test Pattern function:
Mode
▪ Always on: the video output port always transmits the
test pattern.
Auto: the video output port transmits the test pattern if
▪
there is no incoming signal on the selected input port.
▪ Always off: the test pattern function is disabled, the
video output port transmits the video signal of the
selected input port.
▪ Freeze: the signal freezes at the last video frame on the
sink device (the sink may show a broken frame either).
#freeze #new
Color
Three ways are available to set the no sync screen color:
▪ Click on the predefined color;
▪ Use the sliders;
▪ Type the RGB code of the color.
When the desired color is selected, press the Set color button to store.
Port Tile
The port tile of the HDMI outputs displays when No sync screen mode
is active.

INFO: No sync screen will be active in the case of connected sink
device to the output port only.
8.12.3. Identify Stream / Identify Display
Clicking on the Identify Stream
/ Identify Display button makes
generating 10 test colors on the
display device for 10 seconds. The
feature helps to identify the stream
and the screen itself physically.
#identifystream #identifydisplay
The order of the generated colors
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
#testpattern #nosyncscreen
8.13. EDID Management Menu
Advanced EDID Management can be accessed by selecting the EDID Management menu. There are two
panels: left one contains Source EDIDs, right one contains Destination places where the EDIDs can be
emulated or copied. #edid
Control Buttons
Exporting an EDID (save to a
EXPORT
file)
Importing an EDID (load from
IMPORT
a file)
Display EDID Summary
INFO
window
Opening Advanced EDID Editor
EDIT
with the selected EDID
CREATE Opening Easy EDID Creator

EDID Management menu

Transfer button: executing
EDID emulation or copying
Deleting EDID (from User
DELETE SELECTED
memory)
Selecting all memory places
SELECT ALL
in the right panel
Selecting none of the memory
SELECT NONE
places in the right panel
114 114