Crosspoint Menu - Audio Layer; Grid View; Tile View - Lightware UBEX-MMU-X200 User Manual

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
8.5. Crosspoint Menu - Audio Layer
8.5.1. Grid View
The grid view of the crosspoint menu - Audio layer in Matrix mode
The operation of the Audio layer in grid view is basically the same as the
Clicking on the source or the destination port the properties panel opens on the right side - all audio related
information and options are available here. Tags are also attached to the audio stream. See the details about
the available settings in the Audio Port Properties Windows
INFO:
When the Audio follows video setting is enabled, the tags which are added to the video stream will be
copied to the audio stream as well.
Two options are available switching the audio crosspoint settings:
▪ Audio follows video: when the Audio follows video setting is enabled, the audio stream follows the video
stream when the video crosspoint is changed. Beside of this the audio streams can be switched
separately from the video streams on the Audio crosspoint tab.
▪ Free audio crosspoint settings: when the Audio follows video setting is disabled, switching of a video
stream does not effect the audio crosspoint state.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Crosspoint Menu - Video Layer.
section. #audio #switch #crosspoint
8.5.2. Tile View
The tile view of the crosspoint menu - Audio layer in Matrix mode
Source and destination port properties are available by clicking on the Parameters button. Switching between
the inputs and outputs has two available options: the
are the same like in the

Tile View

of the Video layer.
Clicking on the Parameters button opens the properties of the selected source or destination stream. See the
details about the available settings in the
Take Mode and Autotake Mode, the working methods
Audio Port Properties Windows section.
89 89