Query The Installed Firmware Package Version; Launching The Firmware Update Procedure; Cancellation Of The Firmware Update Procedure; Restarting The Firmware Update Procedure - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.24.2. Query the Installed Firmware Package Version
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.PackageVersion
pr•/SYS/ENDPOINTS/<UBEX_EP>.PackageVersion=<firmware_package_version>
æ
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1.PackageVersion
æ pr /SYS/ENDPOINTS/UBEX0039A1.PackageVersion=v1.4.2b4
9.24.3. Launching the Firmware Update Procedure
Calling the method results launching the firmware update procedure on the selected endpoint device.
Command and Response
ç CALL•/SYS/ENDPOINTS/<UBEX_EP>:startFirmwareUpdate()
æ mO•/SYS/ENDPOINTS/<UBEX_EP>:startFirmwareUpdate
Example
ç CALL /SYS/ENDPOINTS/UBEX0039A1:startFirmwareUpdate()
æ mO/SYS/ENDPOINTS/UBEX0039A1:startFirmwareUpdate
9.24.4. Cancellation of the Firmware Update Procedure
Calling the method results the cancellation of the running firmware update procedure on the selected
endpoint devices.
Command and Response
ç CALL•/SYS/ENDPOINTS:cancelFirmwareUpdate(<UBEX_EP>)
æ mO•/SYS/ENDPOINTS:cancelFirmwareUpdate
Example
ç CALL /SYS/ENDPOINTS:cancelFirmwareUpdate(UBEX0039A1;UBEX0039A6)
æ mO/SYS/ENDPOINTS:cancelFirmwareUpdate
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
9.24.5. Restarting the Firmware Update Procedure
Calling the method results the restarting the firmware update procedure on the selected endpoint devices.
Command and Response
ç CALL•/SYS/ENDPOINTS:restartFirmwareUpdate(<UBEX_EP>)
æ mO•/SYS/ENDPOINTS:restartFirmwareUpdate
Example
ç CALL /SYS/ENDPOINTS:restartFirmwareUpdate(UBEX0039A1;UBEX0039A6)
æ mO/SYS/ENDPOINTS:restartFirmwareUpdate
9.24.6. Query the Firmware Update Progress
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.FirmwareUpdateProgress
pr•/SYS/ENDPOINTS/<UBEX_EP>.FirmwareUpdateProgress=<status>
æ
Parameters
Parameter
<status>
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1.FirmwareUpdateProgress
æ pr /SYS/ENDPOINTS/UBEX0039A1.FirmwareUpdateProgress=P
9.24.7. Query the Last Message of the Firmware Update
The query returns with the last message of the firmware update procedure which can give additional
information about the update process.
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.FirmwareUpdateLastMessage
pr•/SYS/ENDPOINTS/<UBEX_EP>.FirmwareUpdateLastMessage=<message>
æ
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1.FirmwareUpdateLastMessage
æ pr /SYS/ENDPOINTS/UBEX0039A1.FirmwareUpdateLastMessage=
Parameter description Value
E Erasing
P Programming
Periodic progress update
V Verifying
about the update process
D Done
T Total
184 184
Value description