Lightware UBEX-MMU-X200 User Manual page 220

 
     
13. Assembly Guides 13. Assembly Guides
Step 5. Remove the front plate from the chassis.
Step 6. Push out the four light pipes from the front plate starting from the rear side of the plate.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Insertion of the New Front Plate
Step 1. Insert the four light pipes to the new front plate starting from the front side of the plate. Take care of the
direction of the light pipes.
Step 2. Place the front plate to the chassis.
220 220