Hdmi Connector; Ethernet Connectors; Neutrik Opticalcon Connectors - Lightware UBEX-MMU-X200 User Manual

 
     
5. Installation 5. Installation
5.4.7. HDMI Connector
The endpoint device provides standard 19-pole HDMI connector for inputs and outputs with
HDMI 2.0 support. Always use high quality HDMI cable for connecting sources and displays.
See more details about the AV interfaces in the
5.4.8. Ethernet Connectors
Standard RJ45 Connector
UBEX F-series endpoint devices and the Matrix Management Unit provide standard RJ45
connectors for LAN and user Ethernet access. Always use high quality Ethernet cable.
Neutrik etherCON Connector
UBEX R-series endpoint devices provides Neutrik etherCON NE8FDV-YK connector for LAN
and user Ethernet access.
ATTENTION!
Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S*
cables.
Wiring of LAN Cables
Lightware recommends the termination of LAN cables on the basis of TIA/EIA T 568 A or TIA/EIA T 568 B
standards.
Top
Pin TIA/EIA T568A
1
2
3
4
5
6
7
8
Wiring of LAN cables by types
WARNING!
Never connect non-assembled CATx cable to the port while the unit is powered, it may
damage the device.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
Video Interface and the Audio Interface sections.
Bottom Side
Wire color TIA/EIA T568B Wire color
white/green white/orange
green orange
white/orange white/green
blue blue
white/blue white/blue
orange green
white/brown white/brown
brown brown
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
5.4.9. Neutrik opticalCON Connectors
UBEX R-series endpoint devices are built with singlemode or multimode Neutrik opticalCON connectors.
Number of
connectors
Connector
drawing
Connector type
Type of the SFP+
module inside
the enclosure
Mode
Supported cable
Number of
required optical
cables for 20GbE

ATTENTION!
(A-A; B-B) cables. Please use standard (A-B) cable only.
See the details about the maximum fiber cable extensions in the
See the more details about the cabling between the Neutrik optical connectors and the SFP+ modules
installed in a F-series endpoint or a network switch in the
Endpoints section.
UBEX-PRO20-HDMI-R100 models
2 2 1
NO2-4FDW-A
Module A:
1x Finisar
FTLX2072D327
2x Finisar 2x Finisar
FTLX8574D3BCL FTLX1475D3BCL
Module B:
1x Finisar
FTLX2072D333
Multimode Singlemode Singlemode
LC, Neutrik LC, Neutrik LC, Neutrik
opticalCON opticalCON opticalCON
DUO DUO DUO
1x Neutrik
2x Neutrik opticalCON DUO /
opticalCON DUO
4x LC simplex / 2x LC duplex
/ 2x LC simplex
The 2xSM-BiDi-DUO model does not support the Neutrik opticalCON DUO crossed fiber wiring
R-series Endpoint
Connection between the Switch and R-series
39 39
1 1
NO4FDW-A
2x Finisar 2x Finisar
FTLX8574D3BCL FTLX1475D3BCL
Multimode Singlemode
Neutrik Neutrik
opticalCON opticalCON
QUAD QUAD
1x Neutrik opticalCON QUAD
section.