Query The Modified Resolution Of The Stream Destination; Query The Bandwidth Of The Stream; Query The Control Module Of The Stream Destination; Query The Bandwidth Limitation Indicator - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.16.9. Query the Modified Resolution of the Stream Destination
The query returns with the current resolution of the outgoing stream on the receiver which contains the
possible signal modification by the scaler or FRC.
Command and Response
ç GET•/MEDIA/STREAMS/VIDEO/<out>/PORT.Resolution
pr•/MEDIA/STREAMS/VIDEO/<out>/PORT.Resolution=<resolution>
æ
Example
ç GET /MEDIA/STREAMS/VIDEO/D102/PORT.Resolution
æ pr /MEDIA/STREAMS/VIDEO/D102/PORT.Resolution=3840x2160p30
9.16.10. Query the Bandwidth of the Stream
Bandwidth property provides the required Ethernet bandwidth of the stream.
Command and Response
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.Bandwidth
pr•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.Bandwidth=<bandwidth>
æ
Example
ç GET /MEDIA/STREAMS/VIDEO/S102/STREAM.Bandwidth
æ pr /MEDIA/STREAMS/VIDEO/S102/STREAM.Bandwidth=13.15
The bandwidth is in Gigabit/sec.
9.16.11. Query the Control Module of the Stream Destination
The query returns with the control owner of the stream destination which means that the output port is
controlled by the crosspoint or it is the part of a video wall.
Command and Response
ç GET•/MEDIA/XP/VIDEO/<out>/.OwnedBy
pr•/MEDIA/XP/VIDEO/<out>/.OwnedBy=<control_module>
æ
Parameters
The <control_module> can be Crosspoint or the video wall ID.
Example
ç GET /MEDIA/XP/VIDEO/D101.OwnedBy
æ pr /MEDIA/XP/VIDEO/D101.OwnedBy=Videowall1
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
9.16.12. Query the Bandwidth Limitation Indicator
BandwidthLimitExceeded property indicates the signal bandwidth limit has been exceeded and the stream
is disabled.
Command and Response
ç GET•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.BandwidthLimitExceeded
pr•/MEDIA/STREAMS/VIDEO/<in|out>/STREAM.Bandwidth=<logical_value>
æ
Parameters
Parameter
<logical_value>
Example
ç GET /MEDIA/STREAMS/VIDEO/S102/STREAM.BandwidthLimitExceeded
æ pr /MEDIA/STREAMS/VIDEO/S102/STREAM.BandwidthLimitExceeded=false
9.16.13. Query the Status of the Analog Audio Output
MuteStatus property indicates the current status of the analog audio output port.

DIFFERENCE:
Command and Response
ç GET•/MEDIA/STREAMS/AUDIO/<out>/Port.MuteStatus
pr•/MEDIA/STREAMS/AUDIO/<out>/Port.MuteStatus=<status>
æ
Parameters
Parameter
<status>
Example
ç GET /MEDIA/STREAMS/AUDIO/D103/PORT.MuteStatus
æ pr /MEDIA/STREAMS/AUDIO/D103/PORT.MuteStatus=unmuted
Parameter description Value
The bandwidth of the Ethernet connection
true
does NOT allow to send/receive the stream.
Bandwidth limit has
been exceeded or not.
The bandwidth of the Ethernet connection
false
allows to send/receive the stream.
The UBEX-PRO20-HDMI-F110 endpoint model is built with analog audio output port only.
#analogaudio
Parameter description Value
nosignal
unmuted
muted
Status of the analog
audio output
muted (unsupported)
disrupted
171 171
Value description
Value description
No signal is transmitted on the port.
The port is unmuted.
The port is muted.
The port is muted because the
incoming signal is unsupported.
Supported signal type: PCM, up to 48 kHz.
The audio signal is disrupted due to
Ethernet packet loss.