Zone Properties Window - Lightware UBEX-MMU-X200 User Manual

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
8.19.6. Zone Properties Window
Zone Information
The most important information and settings of the stream are available in the Zone information section.
Settings
▪ Zone naming;
▪ Change background color: when no signal / no source stream is set for the zone, the color which is set
here will appear on the display devices. The working method is the same with the
(Test Pattern) function.
▪ Identify Zone: see the details about this feature in the
Tags
Unique and configurable tags can be attached to the stream for the best identification. The tags are
searchable in the Search Field. #tag
Status
All important information (streams enabled, signal present, HDCP status e.g.) are available in the status
section. The Zone layout and the Source stream are also can be checked in this panel.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4

Zone properties window

Identify Stream / Identify Display
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Layout Information
The most important information and settings of the input port are available in the Port information section.
Settings
▪
Zone naming;
▪ Layout state (active / inactive);
▪ Activate layout: clicking on the button makes the current layout to active on the video wall;
Status
▪ Layout drawing.
Video Wall Information
Settings
▪ Video wall naming;
▪ Change background color: when no signal / no source stream is set for the video wall, the color which is
set here will appear on the display devices. The working method is the same with the
(Test Pattern)
▪ Identify Zone: see the details about this feature in the
Output Settings
▪ Timing mode (Free run / Source locked): see more details about it in the
#timingmode #freerun #sourcelocked
▪ Scaling mode:
– Passthrough: the scaler is in pass-through mode.
– Forced resolution: the scaling is active, the selected value in the forced resolution option will be
applied on the video signal;
– EDID based: the scaler forces the resolution which is read out from the EDID of the connected sink
device.
No Sync Screen
▪ Scale to: list of the available resolutions with refresh rate values. The selected one will be applied on
the video signal. See the available resolution in the
section.
▪ Color space conversion (No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2);
Status
▪ Video wall size;
▪ Display count.
function.
Identify Stream / Identify Display
#scaler
Resolutions of the Scaler / FRC
129 129
No Sync Screen
section.
Timing Modes section.
section.
#csc #colorspace