Switching The Video Stream To The Video Wall Zone; Audio Crosspoint Settings; Query The Status Of All Audio Ports; Switching The Audio Stream To One Destination - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.11.51. Switching the Video Stream to the Video Wall Zone
Command and Response #switch #crosspoint
ç CALL•/MEDIA/XP/VIDEO:switch(<in>:<zone_ID>)
æ mO•/MEDIA/XP/VIDEO:switch=
Example
ç CALL /MEDIA/XP/VIDEO:switch(S501:Z111;S101:Z112;S302:Z113)
æ mO /MEDIA/XP/VIDEO:switch=
9.12. Audio Crosspoint Settings
Parameters #audio
Parameter Description
<in> Audio stream source ID
<out> Audio destination ID
9.12.1. Query the Status of All Audio Ports
The query returns with all information about the source streams and the destinations. The respond contains
the following information:
▪ Enable/disable status
▪ Signal presence
▪ Crosspoint status (which stream is connected to the destination port)
▪ Source/destination names, tags
▪ Device tags
Locking status
▪
Command and Response
ç GET•/MEDIA/XP/AUDIO/*.*
æ pr•/MEDIA/XP/AUDIO/*.*
9.12.2. Switching the Audio Stream to One Destination
Command and Response
ç CALL•/MEDIA/XP/AUDIO:switch(<in>:<out>)
æ mO•/MEDIA/XP/AUDIO:switch=
Example
ç CALL /MEDIA/XP/AUDIO:switch(S501:D302;S101:D301)
æ mO /MEDIA/XP/AUDIO:switch=
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Formula
S<logical_devive_ID><stream_nr>
D<logical_device_ID><out_port_nr>
9.12.3. Switching an Audio Stream to All Destinations
The selected audio stream is switched to all outputs.
Command and Response
ç CALL•/MEDIA/XP/AUDIO:switchAll(<in>)
æ mO•/MEDIA/XP/AUDIO:switchAll=
Example
ç CALL /MEDIA/XP/AUDIO:switchAll(S101)
æ mO /MEDIA/XP/AUDIO:switchAll=
9.12.4. Query the Number of the Source Ports
The query returns with the number of all source (input) ports including the disabled ones.
Command and Response
ç GET•/MEDIA/XP/AUDIO.SourcePortCount
pr•/MEDIA/XP/AUDIO.SourcePortCount=<number>
æ
Example
ç GET /MEDIA/XP/AUDIO.SourcePortCount
æ pr /MEDIA/XP/AUDIO.SourcePortCount=36
9.12.5. Query the Number of the Destination Ports
The query returns with the number of all destination (output) ports including the disabled ones.
Command and Response
ç GET•/MEDIA/XP/AUDIO.DestinationPortCount
pr•/MEDIA/XP/AUDIO.DestinationPortCount=<number>
æ
Example
ç GET /MEDIA/XP/AUDIO.DestinationPortCount
æ pr /MEDIA/XP/AUDIO.DestinationPortCount=36
164 164