Infrared Port Configuration - Endpoint Devices; Enable/Disable The Port; Setting The Name Of The Input Port; Setting The Name Of The Output Port - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.22. Infrared Port Configuration - Endpoint Devices

DIFFERENCE: Only the UBEX-PRO20-HDMI-F110 endpoint model is built with IR input/output ports.
Parameters #infra #ir
Parameter
<in> IR input port, example: S101
<out> IR output port, example: D101
9.22.1. Enable/Disable the Port
Command and Response
SET•/MEDIA/CONTROL/IR/<in|out>.Enabled=<logical_value>
ç
pw•/MEDIA/CONTROL/IR/<in|out>.Enabled=<logical_value>
æ
Parameters
Parameter Parameter description
Port enable/disable
<logical_value>
setting
Example
ç SET /MEDIA/CONTROL/IR/S101.Enable=true
æ pw /MEDIA/CONTROL/IR/S101.Enable=true
9.22.2. Setting the Name of the Input Port
Command and Response
SET•/MEDIA/CONTROL/IR/<in>.SourceName=<name>
ç
pw•/MEDIA/CONTROL/IR/<in>.SourceName=<name>
æ
Example
ç SET /MEDIA/CONTROL/IR/S101.SourceName=Emitter_TV
æ pw /MEDIA/CONTROL/IR/S101.SourceName=Emitter_TV
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Description
Value Value description
true The port is enabled.
false The port is disabled.
9.22.3. Setting the Name of the Output Port
Command and Response
SET•/MEDIA/CONTROL/IR/<out>.DestinationName=<name>
ç
pw•/MEDIA/CONTROL/IR/<out>.DestinationName=<name>
æ
Example
ç SET /MEDIA/CONTROL/IR/D101.DestinationName=Detector_MeetingRoom1
æ pw /MEDIA/CONTROL/IR/D101.DestinationName=Detector_MeetingRoom1
9.22.4. Change Command Injection Port Number
Command and Response
SET·/MEDIA/CONTROL/IR/<in|out>.ServerPort=<port_no>
ç
pw·/MEDIA/CONTROL/IR/<in|out>.ServerPort=<port_no>
æ
Example
ç SET /MEDIA/CONTROL/IR/D101.CommandInjectionPort=9001
æ pw /MEDIA/CONTROL/IR/D101.CommandInjectionPort=9001
9.22.5. Enable/Disable Output Signal Modulation
Command and Response
SET·/MEDIA/CONTROL/IR/<out>/PORT.EnableModulation=<logical_value>
ç
pw·/MEDIA/CONTROL/IR/<out>/PORT.EnableModulation=<logical_value>
æ
Parameters
Parameter Parameter description
Signal modulation enable/
<logical_value>
disable setting
Example
ç SET /MEDIA/CONTROL/IR/D101/PORT.EnableModulation=false
æ pw /MEDIA/CONTROL/IR/D101/PORT.EnableModulation=false

INFO: The default setting value is true (enabled).
180 180
Value Value description
true The signal modulation is enabled.
false The signal modulation is disabled.