Query The Claiming Status Of An Endpoint; Unclaiming An Endpoint; Unclaiming All Endpoints; Query The Number Of The Mapped Endpoints - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.7.10. Query the Claiming Status of an Endpoint
Command and Response
ç GET•/SYS/ENDPOINTS/<UBEX_EP>.ClaimingStatus
pr•/SYS/ENDPOINTS/<UBEX_EP>.ClaimingStatus=<status>
æ
Parameters
Parameter Parameter description
Claiming status of the
<status>
selected endpoint
Example
ç GET /SYS/ENDPOINTS/UBEX0039A1.ClaimingStatus
æ pr /SYS/ENDPOINTS/UBEX0039A1.ClaimingStatus=Claimed
9.7.11. Unclaiming an Endpoint
The command makes the selected endpoint to be unclaimed from the UBEX matrix.
Command and Response
ç CALL•/SYS/ENDPOINTS:unclaimEndpoint(<UBEX_EP>)
æ mO•/SYS/ENDPOINTS:unclaimEndpoint=
Example
ç CALL /SYS/ENDPOINTS:unclaimEndpoint(UBEX0039A1)
æ mO /SYS/ENDPOINTS:unclaimEndpoint=
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Value Value description
The device is under the unclaiming
procedure, it can be after the running of the
Unclaiming
unclaimEndpoint() or unclaimAllEndpoint()
commands typically.
The device is under initialization, it can
Initializing be during the first connecting to the MMU
typically.
Claiming The device is under the claiming procedure.
The device is under the reclaiming
Reclaiming procedure, it can be after operation mode
changing typically.
The device is under the restoring procedure,
Restoring it can be during rebooting of a claimed
endpoint device.
The device is claimed by the MMU and
Claimed
ready to use in the UBEX matrix.
9.7.12. Unclaiming All Endpoints
The command makes all endpoints to be unclaimed from the UBEX matrix.
Command and Response
ç CALL•/SYS/ENDPOINTS:unclaimAllEndpoint()
æ mO•/SYS/ENDPOINTS:unclaimAllEndpoint=
Example
ç CALL /SYS/ENDPOINTS:unclaimAllEndpoint()
æ mO /SYS/ENDPOINTS:unclaimAllEndpoint=
9.7.13. Query the Number of the Mapped Endpoints
The query returns the number of mapped endpoint which got a logical device ID. This number is equal with
the result of the Query the Number of Registered
Command and Response
ç GET•/MEDIA/DEVICEMAP.MappedEndpointCount
pr•/MEDIA/DEVICEMAP.MappedEndpointCount=<number>
æ
Example
ç GET /MEDIA/DEVICEMAP.MappedEndpointCount
æ pr /MEDIA/DEVICEMAP.MappedEndpointCount=45
9.7.14. Query the Endpoint ID of a Logical Device ID
The query returns with the UBEX endpoint ID assigned to the selected logical device ID.
Command and Response
GET•/MEDIA/DEVICEMAP.<logical_device_ID>
ç
pr•/MEDIA/DEVICEMAP.<logical_device_ID>=<UBEX_EP>
æ
Example
ç GET /MEDIA/DEVICEMAP.X1
æ pr /MEDIA/DEVICEMAP.X1=UBEX0039A1
Endpoints.
142 142