Audio Interface; Transmitter Mode - F100/R100 Models; Receiver Mode - F100/R100 Models - Lightware UBEX-MMU-X200 User Manual

 
     
6. UBEX Concept 6. UBEX Concept
6.5. Audio Interface
6.5.1. Transmitter Mode - F100/R100 Models
Port Diagram
The port diagram is valid for the
following UBEX endpoint model:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-R100
series
Description
The transmitter receives HDMI
audio signals via the two HDMI
input ports. The audio streams
are transmitted toward the remote
endpoint device over the SFP+
Audio port diagram of the F100/R100 transmitter in connection with
links. The two source streams
can be selected to any output port
on the destination side. The crosspoint settings are supervised by the MMU.
The HDMI output ports of the transmitter are HDMI loop-back ports and can be used as local HDMI outputs.
6.5.2. Receiver Mode - F100/R100 Models
Port Diagram
The port diagram is valid for the following UBEX endpoint model:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-R100 series
Audio port diagram of the F100/R100 receiver in connection with an F110 endpoint
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
an F110 endpoint
Description
The receiver receives two HDMI audio streams via the SFP+ links. The streams can be selected to any HDMI
output ports, the crosspoint settings are available in the MMU.
Source Multiplexer (MUX)

INFO: The source MUX function can be set on the video side only in the Lightware Device Controller (LDC
software and using LW3 protocol commands as well.
The source multiplexer (Source MUX) makes available routing more different source signals to the HDMI
output ports. The type of sources is different by the two outputs.
HDMI out 1
▪ Able to accept audio signal via the SFP+ links from the remote endpoint device;
▪ Able to accept audio signal via the local HDMI in 1 port.
HDMI out 2
▪ Able to accept audio signal via the SFP+ links from the remote endpoint device;
▪ Able to accept audio signal via the local HDMI in 2 port;
▪ Able to copy the signal of the HDMI out 1 port. This is the COPY function.
HDMI Input Modes
The HDMI input ports of the receiver operate as local HDMI inputs.
71 71