Ports Menu - Transmitter Operation Mode; Tx I1 And Tx I2 Ports; Tx O1 And Tx O2 Ports; Ports Menu - Receiver Operation Mode - Lightware UBEX-MMU-X200 User Manual

 
     
4. Front Panel LCD Menu Operation - Endpoints 4. Front Panel LCD Menu Operation - Endpoints
4.4. Ports Menu - Transmitter Operation Mode
The most important status information of the HDMI input and local output ports
are available in the Ports menu.
Select the desired input or output port and enter to see the submenus.
4.4.1. TX I1 and TX I2 Ports
HDMI Input
Information about the HDMI inputs are displayed:
▪ +5V present
▪ Signal present
▪ Active resolution
▪ Total resolution
▪ Color space
Stream Output
Information about the streams coming from the HDMI inputs are displayed:
▪ Signal present
▪ Active resolution
▪ Total resolution
Color space
▪
4.4.2. TX O1 and TX O2 Ports
The following information is displayed for both local output ports:
▪ Hotplug detect
▪ Signal present
▪ Active resolution
Total resolution
▪
▪ Color space
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
4.5. Ports Menu - Receiver Operation Mode
The most important status information of the HDMI output ports are available
in the Ports menu.
Select the desired output port and enter to see the submenus.
4.5.1. RX HDMI Output 1 and 2 Ports
Stream Input
The following settings and information are related to the video stream coming from the TX input ports:
▪ Signal present
▪ Active resolution
▪ Total resolution
▪ Color space
HDMI Output
The following information are displayed in the case of both output ports of the receiver:
▪ Hotplug detect
▪ Signal present
▪ Active resolution
▪ Total resolution
▪ Color space
Source Mux
The source multiplexer (Source MUX) makes available routing more different source signals to the HDMI
output ports. See more details about this function in the
▪ Stream (D1) / Stream (D2) - The signal source of the output port is the stream coming from the remote
device.
Loopback (I1) / Loopback (I2)- The signal source of the output port is the stream of the local input port
▪
of the receiver.
▪ Copy (O1) - The device is able to copy the signal of the HDMI out 1 port. This is the COPY function.
INFO:
The Copy function is available only on the HDMI out 2 (TX O2) port.
4.5.2. RX I1 and RX I2 Ports
The following information is displayed for both local input ports:
The HDCP setting and information about the HDMI inputs are displayed:
▪ +5V present
▪ Signal present
▪ Active resolution
▪ Total resolution
Color space
▪
30 30
Receiver Mode section. #mux #sourcemux #new