Lightware UBEX-MMU-X200 User Manual page 205

 
     
10. Firmware Upgrade 10. Firmware Upgrade
Device List
When the discovery has completed, the devices available on the network are listed in the application.
Legend of the Icons
Icon Name
Identify the device

IP address editor

Further information available

Service mode
  Favorite device
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Description
Clicking on the icon causes the four front panel LEDs blink
in green for 10 seconds. The feature helps to identify the
device itself in the rack shelf.
To modify IP address settings quickly it is not necessary to
enter the device's settings/network menu, you can set them
by clicking the pencil icon next to the IP address.
Device is unreachable. Change the IP address using the
front panel LCD menu or the IP address editor of the LDU2.
The device is in bootload (service) mode. The firmware
upgrade procedure can be continued in this mode.
Frequently used devices can be highlighted with the star
icon as favorite unit. In this case the star becomes orange
filled.
Upgrade Steps
Step 1. Select the firmware package.
Click on the Select Firmware Package button and navigate to the location where the LFP2 file of the UBEX
endpoint is saved. When you click on the name of package, the preview of the release notes are displayed
on the right side.
Firmware file browser and the release notes window
After the package file is loaded, the list is filtered to show compatible devices only. The current firmware
version of the device is highlighted in orange if it is different from the version of the package loaded.
Filtered device list based on the selected firmware package
205 205