Lightware UBEX-MMU-X200 User Manual page 99

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
Signal Info
All important information (resolution, pixel clock, color space, e.g.) are available in the signal info section.
The signal bandwidth and the bandwidth limit reached indicators can also be checked in this panel.
Related Audio Info
Information (presence, audio type, sampling frequency) of the embedded audio is available in the related
audio info section.
Tools
▪ Frame Detector - The tool displays the frame information of the original stream coming from the input
port before a possible rescaling / frame rate conversion.
SFP+ Link Panels
Clicking on the SFP+ Link 1 or 2 panel opens the properties of the SFP+ connections. The most important
signal information and the parameters of the SFP are available from the panel.
ATTENTION!
If the icon appears that means incompatible optical transceiver module is installed to the

endpoint device (SFP optical module (1 GbE) instead of SFP+ module (10 GbE).
Link Aggregation Status Indicator
Icon
SFP+ connection is established successfully and the link aggregation is working
successfully.
No connection is established between the SFP+ links.
INFO:
You can find possible causes and solution suggestions in the
of no connection or link aggregation problems.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
#sfp
Description
Troubleshooting chapter in the case
Analog Audio Input Port Properties Panel

DIFFERENCE: Only the UBEX-PRO20-HDMI-F110 model has built with analog audio input port.
Clicking on the Analog in panel opens the properties of the port properties. The most important signal
information and settings are available from the panel.
Endpoint tab of the Device properties window - Transmitter - Analog audio input port properties
Settings and Tools
▪
Stream naming;
▪ Volume: sets the input volume (attenuation) between 0% (-95.62 dB) and 100% (0 dB). Clicking on the
icon results -1%, the icon results +1% in the volume setting. The default value is 100%.
 
▪ Balance: sets the balance between -100 (total left) and 100 (total right). Clicking on the
-1, the icon results +1 in the balance setting. The default value is 0 (center).

Gain: sets the gain between -12 dB and 35 dB. Clicking on the
▪
+1 dB in the gain setting. The default value is 0 dB.
#analogaudio #volume #balance #gain
icon results

icon results -1 dB, the icon results
 
99 99