Query The Tags Of The Stream/Destination; Adding Tags To The Stream/Destination; Deleting Tags Of The Stream; Deleting All Tags Of The Stream - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.13.7. Query the Tags of the Stream/Destination
The query returns with the tags which are added by the user.
Command and Response #tag
ç GET•/MEDIA/STREAMS/AUDIO/<in|out>.Tags
pr•/MEDIA/STREAMS/AUDIO/<in|out>.Tags=<tag>
æ
Example
ç GET /MEDIA/STREAMS/AUDIO/S102.Tags
æ pr /MEDIA/STREAMS/AUDIO/S102.Tags=PCM;soundtrack;Die_Hard_2
9.13.8. Adding Tags to the Stream/Destination
The following characters are allowed in the
numbers (0-9), and special characters ( - . _ ~ : / ? # [ ] @ ! $ & ( ) + = * ).
Command and Response
ç CALL•/MEDIA/STREAMS/AUDIO/<in|out>:addTags(<tag>)
æ mO•/MEDIA/STREAMS/AUDIO/<in|out>:addTags=
Example
ç CALL /MEDIA/STREAMS/AUDIO/S401:addTags(intro;chillout)
æ mO /MEDIA/STREAMS/AUDIO/S401:addTags=
9.13.9. Deleting Tags of the Stream
Command and Response
ç CALL•/MEDIA/STREAMS/AUDIO/<in|out>:removeTags(<tag>)
æ mO•/MEDIA/STREAMS/AUDIO/<in|out>:removeTags=
Example
ç CALL /MEDIA/STREAMS/AUDIO/D101:removeTags(speakers;meeting_room)
æ mO /MEDIA/STREAMS/AUDIO/D101:removeTags=
9.13.10. Deleting All Tags of the Stream
Command and Response
ç CALL•/MEDIA/STREAMS/AUDIO/<in|out>:removeAllTags()
æ mO•/MEDIA/STREAMS/AUDIO/<in|out>:removeAllTags=
Example
ç CALL /MEDIA/STREAMS/AUDIO/D101:removeAllTags()
æ mO /MEDIA/STREAMS/AUDIO/D101:removeAllTags=
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
<tag> parameter: non-capital letters (a-z), capital letters (A-Z),
9.13.11. Query All Tags of the Device
The query returns with all the tags which belongs to the device. One tag is always reserved for the MAC
address of the endpoint.
Command and Response
ç GET•/MEDIA/STREAMS/AUDIO/<in|out>.DeviceTags
pr•/MEDIA/STREAMS/AUDIO/<in|out>.DeviceTags=<tag>
æ
Example
ç GET /MEDIA/STREAMS/AUDIO/S201.DeviceTags
æ pr /MEDIA/STREAMS/AUDIO/S201.DeviceTags=Intro;A8:D2:36:F0:00:35;TX_MeetingRoom;#2
9.14. Analog Audio Port Settings
DIFFERENCE:
Only the UBEX-PRO20-HDMI-F110 endpoint model is built with analog audio input and
output ports.
9.14.1. Setting the Volume in dB
Command and Response #analogaudio #volume
SET•/MEDIA/STREAMS/AUDIO/<in|out>/Port.VolumedB=<volume>
ç
pw•/MEDIA/STREAMS/AUDIO/<in|out>/Port.VolumedB=<volume>
æ
Parameters
Parameter
<volume> Sets the input volume (attenuation) between -95.62 dB and 0 dB.
Example
ç SET /MEDIA/STREAMS/AUDIO/S103/PORT.VolumedB=-15
æ pw /MEDIA/STREAMS/AUDIO/S103/PORT=-15.000
9.14.2. Setting the Volume in Percent
Command and Response
SET•/MEDIA/STREAMS/AUDIO/<in|out>/PORT.VolumePercent=<percent>
ç
pw•/MEDIA/STREAMS/AUDIO/<in|out>/PORT.VolumePercent=<percent>
æ
Example
ç SET /MEDIA/STREAMS/AUDIO/D103/PORT.VolumePercent=50
æ pw /MEDIA/STREAMS/AUDIO/D103/PORT.VolumePercent=50.00
Parameter description
166 166