Establishing The Connection; The Layout Of The Built-In Web - Lightware UBEX-MMU-X200 User Manual

 
     
7. Software Control - Built-in Web 7. Software Control - Built-in Web
System Requirements
Operating System: Microsoft Windows 10, Apple macOS, Linux.
Web Browser: Mozilla Firefox, Google Chrome, Apple Safari.

ATTENTION! The EDID export function works only in Windows and
macOS operating systems under Mozilla Firefox or Google Chrome
web browsers.
7.1. Establishing the Connection
ATTENTION!
Please be sure that the computer is in the same
network as the UBEX matrix. If the computer has multiple Ethernet
connections (for example Wi-Fi and LAN connections are used
simultaneously) you will need to know the IP address for the one that
is used for controlling the MMU. #builtinweb #web
Step 1. Connect the matrix and the computer either via
▪ Ethernet, with LAN patch cable, or
▪ Ethernet, with LAN cross cable.
Step 2. Change to the desired IP settings if it needed.
Step 3. Type the IP address to the address bar of the web browser and
press enter (the factory default address is 192.168.0.100).
7.2. The Layout of the Built-in Web
The built-in web page allows the same controlling functions which are
available via the Lightware Device Controller. Select a menu item on
the left side; the default screen is the Crosspoint menu.

ATTENTION! Please enable the pop-up windows in your browser;
certain contents are only displayed in a new window.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Built-in Web page displaying the Crosspoint menu
81 81