Crosspoint Menu With Video Wall - Lightware UBEX-MMU-X200 User Manual

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
8.19.5. Crosspoint Menu with Video Wall
Grid View
Navigate to the Crosspoint menu - Grid View to select a source stream for the video wall.
1
2
3
4
Legend of the Crosspoint Menu
Auto VW layout The explanation of the two available options are the following:
1
activation switcher
▪ Enabled: the video wall layout becomes active suddenly when the
crosspoint setting is changed in it.
▪ Disabled: switching of a source stream does not effect the video wall
layout activation.
2 Non-video wall Source streams, destination streams, and the crosspoint connections which
area are not the part of the video wall.
Video wall - Video wall area, Layout0 (the default layout of the video wall). Clicking on the
3
Layout0 Zone tile ( on the Destination stream side) opens the
on the right side. The layout is not active currently.
4 Video wall - Video wall area, Layout1 (the layout which is created by the user). Clicking
Layout1 on one of the Zone tiles (on the Destination stream side) opens the
Properties Window
5 Properties The properties, available settings, and status information of the selected zone
window are displayed in this section. Three tabs are available: Zone, Layout, and Video
wall. Clicking on the
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Zone Properties Window
on the right side. This layout is the active one.
icon the properties section opens in new window.
Tile View
Navigate to the Crosspoint menu - Tile View to select a source stream for the video wall.
1
5
Legend of the Crosspoint Menu
1 Source streams
Destination
2
streams - non-
video wall area
3 Video wall -
Layout0
4 Video wall -
Layout1
See the detailed information about the tile view of the crosspoint in the
Zone
Each tile represents a stream coming from one of the input ports of the
transmitter or transceiver. Each of them can be selected as a video source for
one of the video wall zones.
Destination streams which are not the part of the video wall.
Video wall area, Layout0 (the default layout of the video wall). Selecting the
Zone tile and clicking to the Parameters button opens the
Window. The layout is not active currently.
Video wall area, Layout1 (the layout which is created by the user). Selecting
one of the Zone tiles and clicking to the Parameters button opens the
Properties Window. This layout is the active one (highlighted with orange).
Tile View
128 128
2
3
4
Zone Properties
Zone
section. #switch #crosspoint