Hdcp Setting; Video Stream Settings - Destination (Output) Side; Query The Name Of The Destination; Setting The Name Of The Destination - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.9.16. HDCP Setting
HDCP capability can be enabled/disabled on the input ports, thus, non-encrypted content can be enforced
so that non-HDCP compliant displays can be used. See more information in the
Command and Response #hdcp
SET•/MEDIA/STREAMS/VIDEO/<in>/PORT.HdcpEnable=<logical_value>
ç
pw•/MEDIA/STREAMS/VIDEO/<in>/PORT.HdcpEnable=<logical_value>
æ
Parameters
Parameter Parameter description
HDCP enable/disable
<logical_value>
setting
Example
ç SET /MEDIA/STREAMS/VIDEO/S101/PORT.HdcpEnable=true
æ pw /MEDIA/STREAMS/VIDEO/S101/PORT.HdcpEnable=true
9.10. Video Stream Settings - Destination (Output) Side
Parameters
Parameter Description
<out> Output port of the RX / TRX
9.10.1. Query the Name of the Destination
INFO:
The default name of the output port is the MAC address of the endpoint device and the output port
number separated by a dot. Example:
Command and Response
ç GET•/MEDIA/STREAMS/VIDEO/<out>.DestinationName
pw•/MEDIA/STREAMS/VIDEO/<out>.DestinationName=<name>
æ
Example
ç GET /MEDIA/STREAMS/VIDEO/D601.DestinationName
æ pw /MEDIA/STREAMS/VIDEO/D601.DestinationName=Projector_Lobby
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
HDCP Management
Value Value description
true HDCP authentication is enabled
false HDCP authentication is disabled
Formula
D<logical_device_ID><out_port_nr>
A8:D2:36:F0:00:04.D2
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
9.10.2. Setting the Name of the Destination
Command and Response
section.
SET•/MEDIA/STREAMS/VIDEO/<out>.DestinationName=<name>
ç
pw•/MEDIA/STREAMS/VIDEO/<out>.DestinationName=<name>
æ
Example
ç SET /MEDIA/STREAMS/VIDEO/D702.DestinationName=Theater1
æ pw /MEDIA/STREAMS/VIDEO/D702.DestinationName=Theater1
9.10.3. Query the Tags of the Destination
Command and Response
ç GET•/MEDIA/STREAMS/VIDEO/<out>.Tags
pr•/MEDIA/STREAMS/VIDEO/<out>.Tags=<tag>
æ
Example
ç GET /MEDIA/STREAMS/VIDEO/D102.Tags
æ pr /MEDIA/STREAMS/VIDEO/D102.Tags=movie;4K60;Pretty_Woman
9.10.4. Adding Tags to the Destination
The following characters are allowed in the
numbers (0-9), and special characters ( - . _ ~ : / ? # [ ] @ ! $ & ( ) + = * ).
Command and Response
ç CALL•/MEDIA/STREAMS/VIDEO/<out>:addTags(<tag>)
æ mO•/MEDIA/STREAMS/VIDEO/<out>:addTags=
Example
ç CALL /MEDIA/STREAMS/VIDEO/D401:addTags(4K30;intro)
æ mO /MEDIA/STREAMS/VIDEO/D401:addTags=
9.10.5. Deleting Tags of the Destination
Command and Response
ç CALL•/MEDIA/STREAMS/VIDEO/<out>:removeTags(<tag>)
æ mO•/MEDIA/STREAMS/VIDEO/<out>:removeTags=
Example
ç CALL /MEDIA/STREAMS/VIDEO/D101:removeTags(cartoon;1080p)
æ mO /MEDIA/STREAMS/VIDEO/D101:removeTags=
#tag
<tag> parameter: non-capital letters (a-z), capital letters (A-Z),
147 147