Search Field; The Concept; Application Areas Of The Search Field - Lightware UBEX-MMU-X200 User Manual

 
     
8. Software Control - Lightware Device Controller 8. Software Control - Lightware Device Controller
8.6. Search Field
8.6.1. The Concept
The Search feature helps to customize the list of the devices in the UBEX matrix due to the user friendly
overview. If you want to find a stream or a source / destination device, do the following steps:
Step 1. Select the type of your search in the list: Source / Destination / Both.

INFO: The Both category means searching the words which are tagged to a Source and a Destination also.
Step 2. Type the name of stream or device. The hints will be appeared in the list.
Step 3. Select the desired tag / stream name / device name. The crosspoint table will be filtered to the ports
containing the searched text.
The crosspoint view before and after the search
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
#search #find
The Search field
Step 4. More key words can be added to the query for the best search efficiency. The query can be saved with
the Add This Query button.
The Search field with more keywords

ATTENTION! The saved queries will be cleared after closing the LDC application.
8.6.2. Application Areas of the Search Field
The Search field is available where the streams and ports can get unique name and tags can be attached to
them. These are:
▪
Video crosspoint - Grid view / Tile view
– Video streams
– Video ports
– Endpoint Devices
▪
Audio crosspoint - Grid view / Tile view
– Audio streams
– Audio ports
– Endpoint Devices
▪
Control menu - Ethernet
– Ethernet ports
– Endpoint devices
▪
Control menu - RS-232
– RS-232 ports
– Endpoint devices

INFO: The search field can be used for searching in the selected layer only. For example searching in the
video crosspoint menu will not find the RS-232 ports.
90 90