Lightware UBEX-MMU-X200 User Manual page 237

 
     
14. Appendix 14. Appendix
Endpoint (v1.5.0b8)
New feature:
▪ Extended Identify Me feature to RJ45 ports
▪ Added support for cropper on secodary video pipe
▪ Added Compatible property to SFP nodes
▪ Added home screen to LCD menu
▪ Added local input loopback and copy features to RX mode
▪ Added support for automatic video freeze on signal loss as a NoSync option
▪ Added copy feature to TRX mode
▪ Added support for manual video freeze
▪ Added support for Dark Mode
▪ Updated video processing latency calculations (fixes tearing and flickering issues in some setups)
▪ Added processing latency property to video pipes
▪ Added support for altering Color Range
▪ Added overall Health Status properties
Bugfix:
▪ Fixed video tearing when converting between 60 and 24 Hz
▪ Fixed a glitch with EDID caching
▪ Fixed a glitch with HDMI outputs after operation mode change (TX/RX/TRX)
▪ Fixed a glitch with TMDS clocks between 310 and 340 MHz (e.g. 3440x1440p60)
▪ Fixed artifacts with video wall at 4K60
▪ Fixed HDMI audio node 'Connected' state
▪ Improved support for newer SFP+ standards (OM3/OM4 and copper lengths)
▪ Fixed a glitch that could cause an additional delay of one frame
v1.2.2b1
Release date: 2020-01-30
New feature:
▪ Added new version of Endpoint's firmware (v1.4.2b4)
▪ The embedded web supports to force HDCP 2.2 Type 1 Content on outputs.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Endpoint (v1.4.2b4)
New feature:
▪ Added option to force HDCP 2.2 Type 1 Content on outputs
Bugfix:
▪ Fixed glitches with settings storage and factory defaults restoration
▪ Improved support for updating devices that are already in service mode
v1.2.1b1
Release date: 2019-12-04
Bugfix:
▪ Added new version of Endpoint's firmware (v1.4.1b2)
Endpoint (v1.4.1b2)
Bugfix:
▪ Fixed a glitch with input scaler configuration storage
▪ Optimized runtime memory usage
v1.2.0b9
Release date: 2019-11-27
Bugfix:
▪ Added the built-in Endpoint firmware version (v1.4.0) for the Centralized Firmware Update.
▪ Fixed some issues (backup, settings storing, status messages, MDNS support) and improved the
stability.
▪ The Centralized Firmware update function is fixed. This feature is working from the installed MMU
firmware v1.1.0 and Endpoint firmware v1.3.1 and available for the later firmware package versions.
▪ IP settings limitation is fixed. The 10.0.0.0/8 IP range is fully supported in the MMU IP settings.
▪ After upgrading the MMU cannot be downgraded to versions prior to v1.2.0.
▪ Fixed some UI bugs and performance issues. Fixed Tile view.
Endpoint (v1.4.0b4)
New feature:
▪ Added check to refuse downgrading to earlier versions
Bugfix:
▪ Added file system in order to cope with bad NAND flash blocks
▪ Improved stability for multicast update
237 237