Lightware UBEX-MMU-X200 User Manual page 15

 
     
1. Introduction 1. Introduction
Local Video Output
User can attach a local monitor to observe the video signal sent through the SFP+ ports.
The resolution and clock frequency are the same with the HDMI inputs, no internal scaling or
conversion is applied. The function is available in transmitter and transceiver operation modes.
Local Video Input
User can attach local source devices to the input ports of the UBEX receiver. The streams with
the received resolution and clock frequency are transmitted on the output ports and no internal
scaling and color conversion is applied. The function is available in receiver operation mode.
#new
Modular SFP+ Interface
UBEX series extenders use standard, certificated 10 Gbps SFP+ optical modules which are plug
and play, so they are swappable by the user.
Silent Operation
The optimized fan operation allows installing the endpoint device to places where minimum
sound emission requires.
Dark Mode
Rental application requires this function, which keeps the LCD screen and the LEDs unlit to hide
the device during the event.
Open API
Open-source API technology at the core makes these Lightware products easy to integrate into
third-party systems. Every bit of data in Lightware systems is openly available for higher level
management and monitoring systems.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
#new
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Only for UBEX-PRO20-HDMI-F110 Model
Audio Embedder and De-embedder Function
The analog audio can be embedded to HDMI outputs and embedded audio can be routed to the
analog audio output in transmitter, receiver, and transceiver operation modes as well.
RS-232 Interface
RS-232
AV systems can also contain serial port for controlled devices. Serial port supports any unit
that works with standard RS-232.
Infrared Interface
Infrared (IR) is a wireless technology used for device communication over short ranges.
Infrared is commonly used for remote control based applications. Third-party control systems
may send IR control commands to endpoints turning them on and off or switching their inputs.
Only for the UBEX-PRO20-HDMI-R100 Series Models
Mounting Threads
Mounting threads on top and one of the sides for the R-series models to conform strict
installation safety regulations.
15 15