Enable Signal Freeze; Disable Signal Freeze; Identify The Display - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.10.19. Enable Signal Freeze
The signal freezes at the last video frame on the sink device (the sink may show a broken frame either).
Command and Response #freeze #new
ç CALL•/MEDIA/STREAMS/VIDEO/<out>/PORT:freezeSignal()
æ mO•/MEDIA/STREAMS/VIDEO/<out>/PORT:freezeSignal
Example
ç CALL /MEDIA/STREAMS/VIDEO/D901/PORT:freezeSignal()
æ mO /MEDIA/STREAMS/VIDEO/D901/PORT:freezeSignal
9.10.20. Disable Signal Freeze
The signal freezes at the last video frame on the sink device (the sink may show a broken frame either).
Command and Response
ç CALL•/MEDIA/STREAMS/VIDEO/<out>/PORT:unfreezeSignal()
æ mO•/MEDIA/STREAMS/VIDEO/<out>/PORT:unfreezeSignal
Example
ç CALL /MEDIA/STREAMS/VIDEO/D901/PORT:unfreezeSignal()
æ mO /MEDIA/STREAMS/VIDEO/D901/PORT:unfreezeSignal
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
9.10.21. Identify the Display
Calling the method makes generating 10 test colors on the display device for 10 seconds. The feature helps
to identify the stream and the screen itself physically.
Command and Response
ç CALL•/MEDIA/STREAMS/VIDEO/<out>/PORT:identify()
æ mO•/MEDIA/STREAMS/VIDEO/<out>/PORT:identify=
Example
ç CALL /MEDIA/STREAMS/VIDEO/D101/PORT:identify()
æ mO /MEDIA/STREAMS/VIDEO/D101/PORT:identify=
Explanation
#identifydisplay
151 151