Lightware UBEX-MMU-X200 User Manual page 238

 
     
14. Appendix 14. Appendix
v1.1.1b8
Release date: 2019-07-03
New feature:
▪ Added Identify stream function.
▪ Added filter and sort feature to the Upgrade Firmwares tab.
▪ v1.3.2 endpoint firmware supported by MMU.
Bugfix:
▪ Update process improved and fixed issues.
▪ Fixed minor GUI bugs.
Endpoint (v1.3.2b2)
New feature:
▪ Fixed issues with using the 10.0.0.0/8 IP range for control
v1.1.0b10
Release date: 2019-07-02
New feature:
▪ Grid Video Wall is implemented.
▪ Centralized System Update is available - The Firmware update of the Endpoints are managed by the
MMU.
▪ Adding support of Rental Endpoints.
▪ Command injection to IR endpoint ports is available.
Bugfix:
▪ Adding missing 4K EDIDs (F146 - F148) to the Factory EDID list.
▪ Fixing RemoteIP problem by implementing periodic membership report to multicast groups.
▪ Fixing crash caused by TcpTunnel in debug mode.
v1.0.6b10
Release date: 2019-05-03
New feature:
▪ Supports UBEX-PRO20G-HDMI-F110 endpoints (Analog audio input and output, RS-232)
▪ Supports TRX2 mode for UBEX-PRO20G-HDMI-F100 and UBEX-PRO20G-HDMI-F110 endpoints
▪ Video and Audio cross-point Tile View
▪ Redesigned device properties
▪ Supports configuration and tagging of RS-232 and Ethernet endpoint ports
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
▪ Command injection to RS-232 endpoint ports is available
▪ NTP client is available
Bugfix:
▪ General improvements on stabiliy
v1.0.4b1
Release date: 2018-11-20
Bugfix:
▪ Fixed configuration loss during backup-restore and firmware upgrade. This issue was only present in
package version 1.0.3b1. Please be sure to store a backup of your configuration before upgrading from
v1.0.3b1 to v1.0.4b1. Upgrades from other versions are not affected.
v1.0.3b1
Release date: 2018-11-09
Bugfix:
▪ Fixed a bug that caused the MMU not being able to reload the configurations for the endpoints with
918200## part number after the reset of the MMU.
v1.0.2b1
Release date: 2018-09-25
Bugfix:
▪ LCD re-initialization issue is fixed.
v1.0.1b5
Release date: 2018-09-25
New feature:
▪ Basic LCD menu is available to set Network settings and reset the Ubex MMU to factory defaults.
▪ System log viewer is available in the built-in web control software.
▪ The MMU built-in web control software is available.
v1.0.0b6
Release date: 2018-07-05
238 238