Ubex-Mmu-X200; Maximum Fiber Cable Extensions; F-Series Endpoints / Mmu; R-Series Endpoint - Lightware UBEX-MMU-X200 User Manual

 
     
14. Appendix 14. Appendix
14.8.3. UBEX-MMU-X200
The following drawings present the physical dimensions of the Matrix Management Unit. Dimensions are
in mm.
Affected model:
▪

UBEX-MMU-X200

Front View (1:1)
Top View (1:1)
Side View (2:1)
M4 thread
14.4 15.2
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
442
482
14.9. Maximum Fiber Cable Extensions
14.9.1. F-series Endpoints / MMU
The maximum fiber cable extension of the F-series endpoint devices and the MMU depends on the installed
SFP / SFP+ modules. Always read the specification of the modules.
14.9.2. R-series Endpoint
The R-series endpoint devices are built with pre-installed SFP+ modules inside the enclosure. The maximum
fiber cable extension depends on the modules. The SFP+ modules can be changed by the user, see the
details in the SFP+ Module Changing in R-series Endpoints
2xMM-2xDUO / 2xMM-QUAD
Multimode fiber optical cables
OM1 OM2
(62.5/125) (50/125)
Not supported
2xSM-2xDUO / 2xSM-QUAD / 2xSM-BiDi-DUO
Singlemode fiber optical cables
OS1
(62.5/125)
2000 m
244 244
section.
OM3 OM4
(50/125) (50/125)
300 m 400 m
OS2
(50/125)
10000 m