Lightware UBEX-MMU-X200 User Manual page 36

 
     
5. Installation 5. Installation

ATTENTION! Take care of the mounting direction of the screws!
Mounting direction of the screws
Step 3. Take the rack ears on the left and right side of the extender pair as shown in the picture. Insert the
screws into the holes and fix the front ears to the devices.
Assembly of the mounting ears
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
Step 4. As a final step, mount the unit in the rack.

ATTENTION!
screws for mounting. Keep minimum two thread left after the nut screw.
Standard rack installation
Always use all the four screws for fixing the rack ears to the rack rail. Choose properly sized
Mounting the rack ears to the rack rail
36 36