Rear View - Lightware UBEX-MMU-X200 User Manual

 
     
2. Product Overview 2. Product Overview
2.1.2. Rear View
UBEX-PRO20-HDMI-F100
5 6
UBEX-PRO20-HDMI-F110
5 6
5 AC connector Standard IEC connector accepting 100-240 V, 50 or 60 Hz. See more details
about it in the
Ethernet Standard locking RJ45 connectors for 1 Gbps Ethernet connections to
6
connectors control the device, for user Ethernet access, and firmware upgrade purpose.
See the details about the cable wiring in the
the concept of the operation in the
7 HDMI input ports HDMI input ports with HDMI 2.0 support for the source devices. When the
device is configured as a receiver, the ports operate as local HDMI inputs.
The HDMI in 1 port cannot accept AV signal when the device is configured as
transceiver. See more details about the HDMI interface in the
section.
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
7 8 9
q w e r
7 8 9
AC Power Connection section.
Ethernet Connectors
Ethernet Interface section.
Video Interface
8 HDMI output ports
SFP+ port slots
9
q Analog audio input
port
w Analog audio
output port
Infrared
e
connectors
r RS-232 connector
section and
HDMI output ports with HDMI 2.0 support for sink devices. When the device
is configured as transmitter, the both ports operate as local HDMI outputs.
When the device is configured as transceiver, the HDMI out 2 port operate as
local HDMI output. The HDMI out 2 port is able to copy the signal of the HDMI
in 1 port when the device is configured as receiver or transceiver. See more
details about the HDMI interface in the Video Interface
Optical port slots for 2x 10 GbE SFP+ modules or 2x 10 GbE DAC cables. Ports
can be used for either singlemode or multimode fiber optical connections.
See more details about the SFP+ interface in the
section.
5-pole Phoenix connector for balanced analog audio input. The port is
available in all operation modes (TX/RX/TRX). See more details about the
pin assignment in the Symmetrical Analog Stereo Audio Connector
about the cable wiring in the Audio Ports section, and about the analog audio
interface in the Audio Interface section.
5-pole Phoenix connector for balanced analog audio output. The port is
available in all operation modes (TX/RX/TRX). See more details about the
pin assignment in the Symmetrical Analog Stereo Audio Connector
about the cable wiring in the Audio Ports section, and about the analog audio
interface in the Audio Interface section.
3-pole TRS connector, also known as 3.5 mm (1/8") jack plug for optional IR
detector (IR IN) and emitter (IR OUT) connection. See more details about the
pin assignment in the IR Connector section, and about the concept of the
operation in the Infrared Interface section.
3-pole Phoenix connector for serial communication. See more details about
the pin assignment in the RS-232 Connector section, about the cable wiring
in the Serial Ports section, and the concept of the operation in the
Interface section.
21 21
section.
SFP / SFP+ Interfaces
section,
section,
Serial