Adding Tags To The Port; Deleting Tags Of The Port; Deleting All Tags Of The Port; Query All Tags Of The Device - Lightware UBEX-MMU-X200 User Manual

 
     
9. Programmer's Reference 9. Programmer's Reference
9.19.5. Adding Tags to the Port
The following characters are allowed in the
numbers (0-9), and special characters ( - . _ ~ : / ? # [ ] @ ! $ & ( ) + = * ).
Command and Response
ç CALL•/MEDIA/CONTROL/ETHERNET/<port>:addTags(<tag>)
æ mO•/MEDIA/CONTROL/ETHERNET/<port>:addTags=
Example
ç CALL /MEDIA/CONTROL/ETHERNET/P102:addTags(laptop;1gbps)
æ mO /MEDIA/CONTROL/ETHERNET/P102:addTags=
9.19.6. Deleting Tags of the Port
Command and Response
ç CALL•/MEDIA/CONTROL/ETHERNET/<port>:removeTags(<tag>)
æ mO•/MEDIA/CONTROL/ETHERNET/<port>:removeTags=
Example
ç CALL /MEDIA/CONTROL/ETHERNET/P103:removeTags(macbook;meeting_room)
æ mO /MEDIA/CONTROL/ETHERNET/P103:removeTags=
9.19.7. Deleting All Tags of the Port
Command and Response
ç CALL•/MEDIA/CONTROL/ETHERNET/<port>:removeAllTags()
æ mO•/MEDIA/CONTROL/ETHERNET/<port>:removeAllTags=
Example
ç CALL /MEDIA/CONTROL/ETHERNET/P101:removeAllTags()
æ mO /MEDIA/CONTROL/ETHERNET/P101:removeAllTags=
9.19.8. Query All Tags of the Device
The query returns with all the tags which belongs to the device. One tag is always reserved for the MAC
address of the endpoint.
Command and Response
ç GET•/MEDIA/CONTROL/ETHERNET/<port>.DeviceTags
pr•/MEDIA/CONTROL/ETHERNET/<port>.DeviceTags=<tag>
æ
Example
ç GET /MEDIA/CONTROL/ETHERNET/P101.DeviceTags
æ pr /MEDIA/CONTROL/ETHERNET/P101.DeviceTags=Laptop;A8:D2:36:F0:00:35;TX_MeetingRoom;#2
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
series – Matrix Application Mode – User's Manual series – Matrix Application Mode – User's Manual
<tag> parameter: non-capital letters (a-z), capital letters (A-Z),
9.20. Serial Port Configuration - MMU

INFO: The serial port numbering can be found in the
9.20.1. BAUD Rate Setting
Command and Response
SET•/MANAGEMENT/CONTROL/SERIAL/<port>.Baudrate=<baudrate>
ç
pw•/MANAGEMENT/CONTROL/SERIAL/<port>.Baudrate=<baudrate>
æ
Parameters
Parameter Parameter description
<number> Baud rate value
Example
ç SET /MANAGEMENT/CONTROL/SERIAL/P2.Baudrate=9600
æ pw /MANAGEMENT/CONTROL/SERIAL/P2.Baudrate=9600
#rs232 #rs-232 #serial
176 176
Control Port Numbering of the MMU section.
Value Value description
0 0
200 200
300 300
600 600
1200 1200
1800 1800
2400 2400
4800 4800
9600 9600
19200 19200
38400 38400
57600 57600
115200 115200