Figure 13-4 Ac-2R/Ac-3R Unit (Ac Adapter); Figure 13-5 Connecting The Ac Adapter To An Installed Adapter - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
3. The Plug Puller shown in
Adapter) is a hollow cylindrical sleeve with a post and a circular
rim on the base. The plug of the adapter is inserted in this hole,
and the sleeve is pulled over the back of the plug to seat the
post that can then be used to unplug the adapter.
4. Locate the plug on the ancillary device that is connected to the
bottom of the Multiline Terminal and plug in the AC Adapter.

Figure 13-5 Connecting the AC Adapter to an Installed Adapter

Figure 13-4 AC-2R/AC-3R Unit (AC
Issue 1.0
13 - 5